Lubrication

Mods and Fixes by P-64 users...
ccpd
Junior member
Posts: 10
Joined: April 6th, 2007, 11:29 am
Location: Kennesaw GA

Lubrication

Post by ccpd »

Howdy Y'all,
Bought my 1972 P-64 new last week and took it to the range shooting American Eagle ammo both hollow points and ball ammo and was pleasantly surprised at the accuracy.

Took it home and stripped it down to include the grips. Being a southpaw, the thumb rest is a nuisance at best. Anyhow, it was dripping red oil (probably rust mixed with oil) I took gun scrubber to the entire gun and here is my question.

Does the gun have to be heavily oiled since it is not exactly tight fitting pieces???
grayfox
Veteran member
Veteran member
Posts: 634
Joined: January 25th, 2007, 12:40 am
Location: smokey Mts

Lubrication

Post by grayfox »

No, the oil is a preservative. Soak that sucker in breakfree or some cleaner, then you can use carb cleaner (1.00 at wally world) to dry if off. Then lightly oil the gun and lightly grease the rails. It will shoot 100% better. Have fun & let us know how it goes.
duggi60
Forum supporter
Forum supporter
Posts: 162
Joined: September 21st, 2006, 3:19 am
Location: central Florida

Lubrication

Post by duggi60 »

My fourth P 64 took a ton of gun cleaner & then I used a lot of
breakfree lube liquid -- worked everything that moved, wiping
excess breakfree off with the mixed in cosmoline from the tight
& little spots -- now its one smooth working P 64.



;D
User avatar
papabear
Global moderator
Global moderator
Posts: 2080
Joined: January 22nd, 2006, 1:16 am
Location: Madisonville, Kentucky

Lubrication

Post by papabear »

CCPD,

Welcome aboard, and glad to have ya here, hope to see you here often.

Papagear
POINT SHOOTER
grayfox
Veteran member
Veteran member
Posts: 634
Joined: January 25th, 2007, 12:40 am
Location: smokey Mts

Lubrication

Post by grayfox »

The problem with the guns is they look like new inside, but they are not. When you think its clean, soak it and clean it again. And welcome to the best lil forum there is.
garry
Veteran member
Veteran member
Posts: 598
Joined: October 22nd, 2006, 7:45 am
Location: Grandview, Missouri

Lubrication

Post by garry »

a friend introduced me to the G96 brand complete Gun Treatment spray can and i am hooked ! That stuff knocks the dirt out and cleans and oils ! It impressed me so much that i have some bottles of Hoppe's 9 just sitting and collecting dust ! i have seen no ill effects on plastics or wood. I will stick with this stuff from now on . very light odor, easy clean up, easy to apply, easy to see why i keep using it. not the cheapest stuff but worth it ! good luck! G
nbender
Forum supporter
Forum supporter
Posts: 687
Joined: April 14th, 2006, 6:35 pm
Location: Washington State

Lubrication

Post by nbender »

Rust mixed with red oil - maybe a combination of oil and cosmoline.

You wrote ".. American Eagle ammo both hollow points and ball ammo ...": I know American Eagle makes FMJ but I never heard of their FMJ ammunition. Was it some other brand of HP?
ccpd
Junior member
Posts: 10
Joined: April 6th, 2007, 11:29 am
Location: Kennesaw GA

Lubrication

Post by ccpd »

nbender,
the ammo was from American Eagle, the shop where I bought the gun is very old and the gunsmith who sold me the gun said the ammo was easily 6-7 years old and I bought the two remaining boxes. At another store I found Hungarian ammo for $10.00 a box for 50 rounds of FMJ
ccpd
Junior member
Posts: 10
Joined: April 6th, 2007, 11:29 am
Location: Kennesaw GA

Lubrication

Post by ccpd »

nbender,
as an add on, the two boxes of American Eagle were $15.00 each and now the AE FMJ at another store is $23.00 a box. That probably demonstrated how old the ammo is. BUT it shot great with no FTF.
grayfox
Veteran member
Veteran member
Posts: 634
Joined: January 25th, 2007, 12:40 am
Location: smokey Mts

Lubrication

Post by grayfox »

CCPD,
I like to keep the old boxs when they are empty, looks good in a den.
himmel
Veteran member
Veteran member
Posts: 733
Joined: January 30th, 2006, 4:21 pm
Location: East Texas

Lubrication

Post by himmel »

Hey guys, anyone ever use a dry lubricant--Christian had some powdered graphite, suggested i use it so I put some in the slide rails--seems to be doing OK, but i'm not sure how long it will last...
bzinggg
Forum supporter
Forum supporter
Posts: 487
Joined: May 30th, 2006, 2:17 pm
Location: Texas

Lubrication

Post by bzinggg »

himmel,

My opinion is that it does not work well in high speed applications. It's ok for door locks and other slow motion devices, but I believe it will jar loose and fall out rather quickly in an automatic pistol. Gun grease or other high temperature grease like wheel bearing grease will stay in place better.
himmel
Veteran member
Veteran member
Posts: 733
Joined: January 30th, 2006, 4:21 pm
Location: East Texas

Lubrication

Post by himmel »

Thanks, bzinggg--Right now, it looks like you rubbed a pecil into the slide recesses-- I expect I'll change it out
nicksterdemus
Senior member
Senior member
Posts: 224
Joined: January 5th, 2007, 9:23 pm
Location: SINTRULL RKINSAW

Lubrication

Post by nicksterdemus »

I dumped mine in a #3 washtub of coal oil fer a week then warshed it out n the crick, greased the rails w/Butch wax n sprayed 'er down w/Marvel Mystery Oil...........................
bzinggg
Forum supporter
Forum supporter
Posts: 487
Joined: May 30th, 2006, 2:17 pm
Location: Texas

Lubrication

Post by bzinggg »

Cricks in your neighborhood have a sizeable amount of solvents in 'em, do they? ;D
Last edited by bzinggg on April 11th, 2007, 12:18 am, edited 1 time in total.
Post Reply