![Hi there :hi:](./images/smilies/hi.gif)
![Shocked :shock:](./images/smilies/icon_eek.gif)
Thanks for any help!
- Robert
You, sir, are a gentleman and a scholar!BRJIII wrote:They have the hammer springs in the following weights: 17, 18, 19 or 20 LB. for $4.29 ea. or you can get a 3 pack of one ea. of the following 18, 19 and 20 LB. for $9.00 I just bought some recoil and hammer springs from them. I didn't see any magazine springs. Try this shortcut: http://www.gunsprings.com/Semi-Auto%20Pistols/cID1 then scroll down on the left side and click on POLISH and it'll take you right to the P-64 springs.
Thanks! So far I've solved one problem (that shouldn't have been a problem!!!) and got my 2 P-64's earlier than expected but had problems with breaking a spring on one.Curly1 wrote:Welcome to the forum Robert.
Let us know how it works out for you.
I DO NOT BELIEVE THIS!!! Two problems in one day and BOTH solved!!! This is EPIC! I just cannot thank you guys enough. I have my name on 2 waiting lists to see if and when trigger springs become (or even are available) and you've come through right here. Fortune musta been smiling on me when I signed up for this forum! Just a quick question: The fact that Norm has the trigger spring available se r4eadily, does that mean it is a known problem with the guns? I mean, like why just that spring? Or does he have other stuff, too?BRJIII wrote:Click here: http://www.p64resource.com/goods.php scroll down and you should find the slide spring you need for $6.00 shipped. He also has trigger springs if you need one. Good luck with your fix.
I thought about the mixed weight package but decided that as hard as the DA pull was (I actually could NOT pull the trigger!!!) that going the lowest was what I wanted at first. How did they expect those poor Polish soldiers to fire that gun? I bet that 24# trigger was responsible for a LOT of deaths! Anyway, I can always order more springs if the 17# is too light. But i have a Bersa 380 pistol setup very similar to this one (lthough not as well finished) with a higher DA pull and then a light SA pull so I'm kinda used to it. We'll see.gemini1 wrote:You should've gotten the Wolff package hammer springs so you can choose which one is right for you/pistol. I have the 18# spring and DA pull is good enough for me to have the pistol on condition one. There's been quite a few report online on the 17# causing the mag to drop while shooting.
Check this thread, where a member had tested the springs SA pull weight.
viewtopic.php?f=1&t=5672
You also might want to go over the various threads on the "how to" in taking the pistol apart safely and trouble free, before making the attempt. One spring or pin flying to outer space, is enough to bang your head on a wall. I had a miserable time, when upon re-assembly, the extractor flew to kingdom come, never to be seen again. I had to wait over two weeks after ordering the part at gunbrokers from a seller from Poland.