Romanian TTC Tokarev pistol

blackblade · Post by **blackblade** » November 28th, 2009, 2:42 am

I did a little modification on a Romanian Tokarev by adding a muzzle break and Marschal wraparound grips (black stained walnut). I also got a Ross tuckable IWB holster.

Post by **papabear** » November 28th, 2009, 10:04 am

Nice additions, appreciate your sharing them with us.

Sgt P · Post by **Sgt P** » November 28th, 2009, 10:44 am

Dom,
Excellent refinsih job on the Romanian Tokarov. I'll have to check with CIA in Georgia, VT to see if any are still available. I wonder how the bake on Aluma-HydeII finish from Brownells would work if I bead blasted an old Tokarov that I have? Sgt P.

dom · Post by **dom** » November 28th, 2009, 10:57 pm

Thanks Sgt. P,
The Dupli-Color high temp engine paint that i used has held up quite well over the past 8 months. All the cleaning supplies i use (Hoppes 9, Kroil, Ballistol) haven't done any damage to the finish.
I plan on refinishing one of my CZ-82s in the next few months, and i've just about decided to try Brownells Aluma-Hyde no bake in Matte Blk.

anjdrifter · Post by **anjdrifter** » November 29th, 2009, 9:01 pm

heres a link to the Dennis grips .posted on different thread
viewtopic.php?t=2958&start=0

blackblade · Post by **blackblade** » December 2nd, 2009, 6:46 am

Had to order a couple more Toks.

Romanian (left) and Polish (right)

Starting to build a little collection of Tokarevs.

anjdrifter · Post by **anjdrifter** » December 2nd, 2009, 6:57 am

Blackblade you got a nice collection started there.. Dont know what it is about them but they are a grabber for me. just something about them just says get me get me.. Plus neat to fire at dusk at a range.

rottenrick · Post by **rottenrick** » December 2nd, 2009, 12:15 pm

I only have the one Romanian. It's a natural pointer to me. Putting a wrap around grip would spoil the feel of it.

desertdave · Post by **desertdave** » January 7th, 2010, 10:30 pm

Hello Dom! I'm very taken with your Romanian/Polish Tokarev Safety Plug! I know that there are a LOT of people out there who would lay down good money to get a plug to replace that mickey mouse (no offense to mickey) safety! Several GunBroker Sellers I've talked to are VERY interested! Joe Bartelt up in the frozen north at gunpartswarehouse.com said he'd make them for me, if I want to sell them.....Would you mind emailing me? at brother40@mac.com so we could discuss this? I have an engineer, gunsmith, FFL01 friend up in Kaufman, TX who is also very interested in being part of this......Thank you!.....DesertDave

zenithman2003 · Post by **zenithman2003** » January 8th, 2010, 11:24 am

I bought one for my son for Christmas and was very impressed with it. The kick is less than my goldcup but the mussle flash is cool. It is going back to the importer today however because of the safety recall.

tiber1 · Post by **tiber1** » February 6th, 2010, 7:54 pm

Tokarev is my next gun purchase. Would love to get a plug to fill the hole from the safety removal!

cichlid · Post by **cichlid** » February 7th, 2010, 12:52 am

I would love a plug too if someone decides to make a few!

tman11787 · Post by **tman11787** » February 24th, 2010, 6:18 pm

Hey DesertDave...Did you ever make contact with Dom on the plug deal...?

mattwestm · Post by **mattwestm** » May 18th, 2010, 1:05 pm

For those who CCW a Tokarev, do you carry with a round in the tube? I fear carrying my Tokarev because of its lack of safety, especially using a IWB holster.

Arik · Post by **Arik** » May 18th, 2010, 9:51 pm

I did at one point. Nothing happened. However their safety is the half cock. I tried to disengage the half cock on both my Polish and Yugo by bumping it onto stuff and neither budged.

The Unofficial P64 Resource Forum