The Unofficial P64 Resource Forum

I bought my P-64 used off of gunbroker.

The previous owner had polished the trigger bar to where it is nice and shiny, but as far as I can tell he just polished it, no metal was removed.

The gun functions fine and after a 100 rounds no problems.

However, if I have the slide off and accidently pull the trigger and drop the hammer, the trigger spring will come off the the trigger bar.

Is this normal or did the previous owner's polishing the trigger bar cause this to happen?

I have actually thought about rebluing the trigger bar to provide some more friction on the spring to keep it in place.

mmafan

The guy might of had problems getting the trigger return spring back on and bent it out of shape or cut it

NORM

mmafan

The guy might of had problems getting the trigger return spring back on and bent it out of shape or cut it

NORM

So that is not normal?

Where can I get a new trigger spring?

mmafan

http://p64.proboards67.com/index.cgi?bo ... 1179953781

NORM

yep, Norm's got some pretty good trigger springs..I bought some from him and they work perfect.

mmafan, you have already found THE man to talk to about such a problem.
:-* Norm is the man. If you have not already read the Sticky book and found it here is the dis-assembly manual created by another great contributer. :-* TTH

Oops forgot the link: http://p64.proboards67.com/index.cgi?bo ... 1180205461

THANKS GUYS

NORM

mmafan, you have already found THE man to talk to about such a problem.
:-* Norm is the man. If you have not already read the Sticky book and found it here is the dis-assembly manual created by another great contributer. :-* TTH

I concur!

Norm "springs" to the rescue !! heehee Hi Norm ! G