Powders used and bullets found to work well I'm slowly amassing information and collecting an assortment of components and formulas. Information what little there is doesn't follow any fixed path. It's all over the place.
Cheers
..MJ..
Any advice on loading the 7.62X25 for my Tokarev's
Re: Any advice on loading the 7.62X25 for my Tokarev's
Try ammoguide.com, join (cost is nominal) and do a search. There are MANY recipes. Searching drove me nuts before I discovered the site.
Powder manufacturers' sites often have recommendations as well.
Best of luck!
Powder manufacturers' sites often have recommendations as well.
Best of luck!
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
Re: Any advice on loading the 7.62X25 for my Tokarev's
I load for the 7.62 x 25 use 223 cases cut them down , resize them , use cast lead bullets in them too ,
load is
7.62 X 25
6 grn's of W231
87 grn lead bullet
NORM
load is
7.62 X 25
6 grn's of W231
87 grn lead bullet
NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976
Re: Any advice on loading the 7.62X25 for my Tokarev's
Here are my go-to loads:
(all using new Starline brass, CCI primers and 5.6 gr of HP-38):
85 gr. PPU JHP: good; fairly accurate
100 gr Hornady SJ: Surprisingly accurate and mild recoil.
(all using new Starline brass, CCI primers and 5.6 gr of HP-38):
85 gr. PPU JHP: good; fairly accurate
100 gr Hornady SJ: Surprisingly accurate and mild recoil.