Any advice on loading the 7.62X25 for my Tokarev's

Discussion on reloading the 9x18 and any other cartridge
Post Reply
MJ1
Member
Member
Posts: 58
Joined: May 3rd, 2016, 6:57 pm

Any advice on loading the 7.62X25 for my Tokarev's

Post by MJ1 » November 29th, 2017, 11:22 am

Powders used and bullets found to work well I'm slowly amassing information and collecting an assortment of components and formulas. Information what little there is doesn't follow any fixed path. It's all over the place. :roll:

Cheers
..MJ..

Image

BeoBill
Member
Member
Posts: 75
Joined: March 16th, 2016, 9:42 pm
Location: Maryland

Re: Any advice on loading the 7.62X25 for my Tokarev's

Post by BeoBill » December 8th, 2017, 6:06 pm

Try ammoguide.com, join (cost is nominal) and do a search. There are MANY recipes. Searching drove me nuts before I discovered the site.

Powder manufacturers' sites often have recommendations as well.

Best of luck!

User avatar
normsutton
Global moderator
Global moderator
Posts: 3553
Joined: February 26th, 2006, 6:59 am
Location: LAKELAND FL.
Contact:

Re: Any advice on loading the 7.62X25 for my Tokarev's

Post by normsutton » March 31st, 2018, 11:43 am

I load for the 7.62 x 25   use 223 cases cut them down  , resize them , use cast lead bullets in them too ,

 load  is 
7.62 X 25 
6 grn's of W231 
87 grn lead bullet 
Image

NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976

ImageImage

BeoBill
Member
Member
Posts: 75
Joined: March 16th, 2016, 9:42 pm
Location: Maryland

Re: Any advice on loading the 7.62X25 for my Tokarev's

Post by BeoBill » December 2nd, 2018, 9:13 pm

Here are my go-to loads:
(all using new Starline brass, CCI primers and 5.6 gr of HP-38):

85 gr. PPU JHP: good; fairly accurate
100 gr Hornady SJ: Surprisingly accurate and mild recoil.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests