Trigger does not actuate the hammer
Trigger does not actuate the hammer
I recently bought a P64 and fired 5 rounds through it. I took it home and took it apart. When I put it back together and pull the trigger it did not actuate the hammer. I took it apart and notice that the Trigger bar is loose. If I turn it upside down and pull the trigger it works. Any help for a novice P64 owner?
Re: Trigger does not actuate the hammer
Figured it out, trigger spring was not resting on the trigger bar. Works fine now.
Re: Trigger does not actuate the hammer
Kudos on figuring that out.