1974 P 64

Info, pictures, advice...
Post Reply
Perry
Junior member
Posts: 20
Joined: November 6th, 2016, 9:00 pm

1974 P 64

Post by Perry »

I have ordered a 1964 P 64, it has not arrived yet. I would like to install a new Wolff recoil spring if that will reduce felt recoil and ease the shock on the firearm. Is the 22 lb. spring the way to go or is that too extreme? I am waiting until it arrives to see how bad the double action trigger pull is. If it is really, really bad, I will also order a lighter hammer spring. I thought an 18 lb. spring would be a decent compromise on the hammer spring. Any advise on this? Thanks.
patJ
Posts: 3
Joined: October 18th, 2016, 1:05 am

Re: 1974 P 64

Post by patJ »

18 pound hammer spring is perfect, the recoil spring is not that bad, make sure your safety lever, spring and detent are in good shape (nice cone shape), never, never dry fire the pistol during field strip: your hammer bar will detach from trigger spring and trigger and will be a pain to reconnect, removing the hammer spring is not that bad, look on you tube for tutorials, and...this is the site to look for hints.
User avatar
chestertnted
Senior member
Senior member
Posts: 310
Joined: July 13th, 2015, 8:53 pm

Re: 1974 P 64

Post by chestertnted »

One of mine is the tri-angle hammer 1974.
I kept original hammer spring, but experimented with the recoil spring.
Regular practice will help handle the DA trigger pull
"For the Founders, the right of the citizen to be armed-they never imagined a world in which they would be disarmed for the supposed benefit of preventing access to weapons by madmen."
User avatar
Curly1
Elite member
Elite member
Posts: 2529
Joined: September 20th, 2011, 11:35 pm
Location: Upstate NY

Re: 1974 P 64

Post by Curly1 »

Welcome to the forum Perry.
Laugh Hard and Often.

Gary
BeoBill
Member
Member
Posts: 85
Joined: March 16th, 2016, 9:42 pm
Location: Maryland

Re: 1974 P 64

Post by BeoBill »

I finally went with a 20# recoil spring after some experimentation (I bought the three spring kit). It all depends on the balance of what your gun likes and what you like. YMMV. Have fun!
robhic
Veteran member
Veteran member
Posts: 502
Joined: April 3rd, 2015, 5:14 pm
Location: Louisiana

Re: 1974 P 64

Post by robhic »

No recoil spring is gonna make a really noticeable difference. In fact, sometimes, iirc, the 22# spring can cause the mags to drop loose. Now, the trigger spring is a MAJOR improvement! The 18# spring is what I have in all 6 of mine.

For real recoil abatement and better grip and control, look at the "Polish Iron" grips. They're molded and slip on around the grip for 4-sided coverage. Very nice! They can be gotten on the forum here.
- Robert

"Giving Money and Power to Government is Like Giving Whiskey and Car Keys to Teenage Boys" - PJ O'Rourke
BeoBill
Member
Member
Posts: 85
Joined: March 16th, 2016, 9:42 pm
Location: Maryland

Re: 1974 P 64

Post by BeoBill »

+1 on the Polish Iron grips. They are the best, and at a reasonable price.
Perry
Junior member
Posts: 20
Joined: November 6th, 2016, 9:00 pm

Re: 1974 P 64

Post by Perry »

The p64 came in today, it is a very nice example. It has been carried a little judging by the bluing but shot very little as the bore is great and there is very little traces of slide wear. Thanks for the welcome and the info, I have ordered a 20 lb. recoil spring and a 18 lb. hammer spring. The double action hammer pull is rather tough.
Perry
Junior member
Posts: 20
Joined: November 6th, 2016, 9:00 pm

Re: 1974 P 64

Post by Perry »

I have replaced the recoil spring with a 20 lb.(easy) and the hammer spring with an 18 lb.(not so easy). The double-action trigger pull has gone from nearly impossible to what you would expect. The single-action trigger pull is still good, the mag release operates a little easier. The safety takes some pressure to take it off safe, I expect that is because the hammer block takes some effort to move with the hammer resting on it. I have not fired it yet but will soon. I am really impressed with the little gun, it is very well made.
Perry
Junior member
Posts: 20
Joined: November 6th, 2016, 9:00 pm

Re: 1974 P 64

Post by Perry »

I have fired the P64 without issue. I have put a Hogue's Handall Universal grip sleeve on it as high as it would go and cut off the excess at the bottom. It gives more to hold on to and the rubber cushions some and is not as slick as the stock grip surface. I shot Brown Bear 94 grain FMJ which functioned well. I have read on this forum that the P64 was designed to fire 71 grain bullets at 1017 fps. Current 94 grain bullets are fired near 1000 fps also. This makes me wonder about the extra battering the gun takes from this. I have changed out the stock 18 lb. recoil spring with a 20 lb. Wolff spring but this is only about 11% stronger. Maybe I should have gone with the 22 lb. spring. Any thoughts on this? Thanks.
Post Reply