I have a Hungarian RK.59 9MM pistol. A dumb-ass stole my clip and left the pistol. I am wondering if anyone knows where I can find a 6-round magazine for this pistol.
Thanks,
RK.59 9mm
- juniustaylor
- Elite member
- Posts: 1408
- Joined: February 9th, 2010, 10:56 pm
- Location: KV, MO
- Contact:
Re: RK.59 9mm
I read that a PA-63 mag will fit in the RK-59 but may hang out a tad. You may have to go that route. I saw a lot of warnings about shooting the RK-59 as they say the metallurgy is bad and the frame will break.
US Air Force Veteran - OEF/OIF
Re: RK.59 9mm
Thank you. I will try finding that particular mag. Junius: it is an aluminum frame, and I am wondering if there is some truth behind that statement, regardin the metallurgy.
Re: RK.59 9mm
Laugh Hard and Often.
Gary
Gary
- fully machined
- Member
- Posts: 162
- Joined: August 14th, 2011, 11:14 pm
Re: RK.59 9mm
CDNN has new two tone pa-63 mags for $19.95.
Re: RK.59 9mm
It's going to be funny when someone tries to use those 9x18s in a 9mm!
- lklawson
- Senior member
- Posts: 469
- Joined: February 19th, 2011, 8:39 pm
- Location: Huber Heights, OH
- Contact:
Re: RK.59 9mm
They'll probably jam up in the chamber or mis-feed. And that's if they even fit into the magazine.PA-Joe wrote:It's going to be funny when someone tries to use those 9x18s in a 9mm!
But, yeah, could be potential kaboom.
Peace favor your sword,
Kirk
The Cheapskate's Guide to Gun Cleaning and Maintenance - "You shouldn't have to spend thousands of dollars on expensive gun cleaning an maintenance products. Find out how to save money with inexpensive alternatives that work just as well."
- surfzombie
- Member
- Posts: 181
- Joined: June 29th, 2010, 10:07 pm
- Location: Utah
Re: RK.59 9mm
Just to clarify. Your Rk59 should be a 9mm Makarov or 9x18mm/ The PA-63 mags will fit but they will hang down at the bottom because they are a7 round mag. Any 6 round mag for the smc 918, smc380 or R61 should fit it like a glove. I would check on gunbroker.com
Re: RK.59 9mm
Surf:
Thanks a lot. I will look into that.
Thanks a lot. I will look into that.