PA-63 I Need a little help

Discussion with questions, answers, and everything else about all other 9x18's
User avatar
chimera
Junior member
Posts: 41
Joined: January 24th, 2008, 8:18 am
Location: richmond va

Re: PA-63 I Need a little help

Post by chimera »

pictures?
User avatar
juniustaylor
Elite member
Elite member
Posts: 1408
Joined: February 9th, 2010, 10:56 pm
Location: KV, MO
Contact:

Re: PA-63 I Need a little help

Post by juniustaylor »

Which parts weren't right? Can the extractor be altered to work?
michaelap
Senior member
Senior member
Posts: 278
Joined: August 29th, 2007, 10:08 am
Location: NE OHIO

Re: PA-63 I Need a little help

Post by michaelap »

I haven't been able to upload pictures of my own gun and parts so I have to use these links, the gun looks exactly the same as mine.

http://www.sunblest.net/gun/FegPA63.htm

these are the parts I ordered
http://www.gunpartscorp.com/catalog/Sea ... +extractor
michaelap
Senior member
Senior member
Posts: 278
Joined: August 29th, 2007, 10:08 am
Location: NE OHIO

Re: PA-63 I Need a little help

Post by michaelap »

It's the plunger, it doesn't match up with the extractor

I was told that the plunger I ordered looks like a safety plunger. I'm in communication with Numrich.
Last edited by michaelap on December 20th, 2010, 11:06 am, edited 1 time in total.
User avatar
chimera
Junior member
Posts: 41
Joined: January 24th, 2008, 8:18 am
Location: richmond va

Re: PA-63 I Need a little help

Post by chimera »

The safety plunger and the extractor plunger are not the same. The extractor plunger has a finger with a flat that fits the step in the extractor rear.
michaelap
Senior member
Senior member
Posts: 278
Joined: August 29th, 2007, 10:08 am
Location: NE OHIO

Re: PA-63 I Need a little help

Post by michaelap »

That much I got. It's the rest of the problem thats getting in the way. It looks like this is going to take some time.
michaelap
Senior member
Senior member
Posts: 278
Joined: August 29th, 2007, 10:08 am
Location: NE OHIO

Re: PA-63 I Need a little help

Post by michaelap »

I finally got the gun together, next will be grips. I stumbled onto this outfit who had what I needed and shipped quicker than ever! Good folks.


http://jackfirstgun.com/
User avatar
juniustaylor
Elite member
Elite member
Posts: 1408
Joined: February 9th, 2010, 10:56 pm
Location: KV, MO
Contact:

Re: PA-63 I Need a little help

Post by juniustaylor »

I didn't even think of suggesting Jack First. I've been to their website a few times in the past but never actually inquired of anything. Glad you got it up and running.
Post Reply