TRIGGER RETURN SPRING
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
TRIGGER RETURN SPRING
Now that I have my P-64's I can make the trigger return spring instead of looking all over the place looking for one you can email me if they need one they are made from .032 stainless steel dental wire the first 5 are free one per person
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976
-
- Senior member
- Posts: 237
- Joined: November 9th, 2005, 11:44 am
- Location: Niceville, Fl/Central City, Pa
- Contact:
TRIGGER RETURN SPRING
Norm,
Thanks for the kind offer.
Sent you an email requesting one.
Stan
Thanks for the kind offer.
Sent you an email requesting one.
Stan
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
TRIGGER RETURN SPRING
STAN
Its on its way and tell me what you think, they work in mine ,these are hand bent I think you will like it . GOT TO KEEP THESE GUNS SHOOTING
NORM
Its on its way and tell me what you think, they work in mine ,these are hand bent I think you will like it . GOT TO KEEP THESE GUNS SHOOTING
NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976
TRIGGER RETURN SPRING
NORMSUTTON,
This is a very nice gesture, and I know the guys do appreciate your efforts!
This is a very nice gesture, and I know the guys do appreciate your efforts!
TRIGGER RETURN SPRING
Norm: I would like one of the springs if you have any left.Thanks very much.Email sent
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
TRIGGER RETURN SPRING
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
TRIGGER RETURN SPRING
ABWEHR
just trying to my part, and help when I can . You got the best group of people on this forum that I have seen in a long time.
THANKS ALOT
NORM
just trying to my part, and help when I can . You got the best group of people on this forum that I have seen in a long time.
THANKS ALOT
NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976
TRIGGER RETURN SPRING
Norm,Now that I have my P-64's I can make the trigger return spring instead of looking all over the place looking for one you can email me if they need one they are made from .032 stainless steel dental wire the first 5 are free one per person
Please send me one, too. Thank you for your graciously provided service.
We few, we happy few, here on the P-64 Board must hang together...
-- T-rat
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
TRIGGER RETURN SPRING
T-RAT
It will be on it's way tomarrow, please leave feedback when you get it in
NORM
It will be on it's way tomarrow, please leave feedback when you get it in
NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976
TRIGGER RETURN SPRING
I'd like two for my two altered pistol. How much are they?
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
TRIGGER RETURN SPRING
WARTHOG
They are free ( for one) to replace broken springs they won't make DA trigger pull any less
need address to send to
you will be # 4
or I can send you 2 and then you can send me what ever the 2nd is worth to you can't make a better deal than that
remember these are hand bent springs
and you will have to trim tales on springs
NORM
They are free ( for one) to replace broken springs they won't make DA trigger pull any less
need address to send to
you will be # 4
or I can send you 2 and then you can send me what ever the 2nd is worth to you can't make a better deal than that
remember these are hand bent springs
and you will have to trim tales on springs
NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976
TRIGGER RETURN SPRING
Is that what could be wrong with my pistol? Was shooting fine and I took it apart. When I reassembled the trigger was not working. I didn't notice any sping missing. There is a metal guide from the hammer to the trigger. If I raise it up, the trigger will shoot. I have pictures I can email To you, if you think you can help.
Thanks
Mike
Thanks
Mike
TRIGGER RETURN SPRING
Unless you took it ALL the way apart, the spring is probably still in there, just not positioned correctly. It lifts the trigger/transfer bar (and the disconnector) when the slide is in battery, to allow the trigger pull to trip the sear. It takes some patience and perhaps dental tools to position the spring correctly when you put it all back together. Hope this helps.
TRIGGER RETURN SPRING
One is fine. I need to read.
I just PMed you my address...
I just PMed you my address...
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
TRIGGER RETURN SPRING
WARTHOG
It will go out to day 4 AP 06
NORM
It will go out to day 4 AP 06
NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976