Anyone know where one could be obtained? Seems like the pistol I am fixing doesn't have one. I bought it from a guy who told me he once had to replace the safety. I had a heck of a time removing the safety myself and when I finally did, it was apparent to me that it had been rigged somehow to stay in without the spring. The detent is there, it was shoved way back into the hole and I had to beat on the slide with my rawhide mallet to get it to come out, that is why I am certain the spring was not there.
I have no idea how he rigged the safety to stay in there and function the way he did. I took it apart because it was really sticky and a real PITA to try and use. I guess that was the reason...
Now I have a pistol that I can not use. :'(
Unless someone knows where I can get one of those pesky springs or what I can use in its stead.
You will be my hero if you are able to help me out. :-*
TIA
Safety Detent Spring?
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
Safety Detent Spring?
warthog
http://www.gunsprings.com/GenPurp/GenPurpNF.html
ULTRA HEAVY DUTY COIL SPRING PAK
Pak contains 14 extremely heavy or stiff coil springs designed for use as extractors and ejectors, plus other uses where extremely heavy spring loads are required. Consists of 7 spring designs, 2 springs of each design. All springs are 6" in length. For use in 3/32" to 5/32" inside diameters. A must for many repair functions.
Stock No. 16110.....$ 11.99
NORM
http://www.gunsprings.com/GenPurp/GenPurpNF.html
ULTRA HEAVY DUTY COIL SPRING PAK
Pak contains 14 extremely heavy or stiff coil springs designed for use as extractors and ejectors, plus other uses where extremely heavy spring loads are required. Consists of 7 spring designs, 2 springs of each design. All springs are 6" in length. For use in 3/32" to 5/32" inside diameters. A must for many repair functions.
Stock No. 16110.....$ 11.99
NORM
Last edited by normsutton on April 9th, 2008, 4:34 am, edited 1 time in total.
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976
Safety Detent Spring?
I'd check this thread out too, in the sticky book:
http://p64.proboards67.com/index.cgi?bo ... 1186018933
http://p64.proboards67.com/index.cgi?bo ... 1186018933
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
Safety Detent Spring?
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976
Safety Detent Spring?
Thanks guys! I actually wound up making one out of an AR grip detent spring, just had to trim to length.
I will be making note of all the other places as well however...
I will be making note of all the other places as well however...