Newbie bought a P-64
-
- Posts: 7
- Joined: August 11th, 2007, 5:28 pm
Newbie bought a P-64
Bought a P-64 last week when I had to send my brand-new Taurus PT-111 back to the factory. Nice little pistol - accurate and built like a tank - but the recoil gets pretty painful after firing off a magazine or so. I sent off for a new 22# recoil spring, which may help a bit. I was wondering what other modifications or additions people had made to mitigate the effects?
There are also a couple of small rust spots on the pistol - primarily on the slide just inside the extraction port. Any tips on how to properly deal with that?
In addition, does anyone have any experience with the FEG .32 pistols now on sale at the surplus sites? Look superficially like the same gun chambered for a smaller round.
There are also a couple of small rust spots on the pistol - primarily on the slide just inside the extraction port. Any tips on how to properly deal with that?
In addition, does anyone have any experience with the FEG .32 pistols now on sale at the surplus sites? Look superficially like the same gun chambered for a smaller round.
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
Newbie bought a P-64
doctormike
WELCOME
Your going to have to flatten the ends of the 22# recoil spring to get it in.
we had to gun grip makers on this site that help with recoil
http://bondgrips.jeffreyjr.net/ and
http://www.marschalgrips.com/
small rust spots on the pistol can buffed out and then cold blued
FEG .32 pistols
are the same as the PA-63
NORM
WELCOME
Your going to have to flatten the ends of the 22# recoil spring to get it in.
we had to gun grip makers on this site that help with recoil
http://bondgrips.jeffreyjr.net/ and
http://www.marschalgrips.com/
small rust spots on the pistol can buffed out and then cold blued
FEG .32 pistols
are the same as the PA-63
NORM
Last edited by normsutton on August 16th, 2007, 2:52 pm, edited 1 time in total.
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976
- papabear
- Global moderator
- Posts: 2080
- Joined: January 22nd, 2006, 1:16 am
- Location: Madisonville, Kentucky
Newbie bought a P-64
doctormike,
First of all, welcome aboard, glad to have ya with us.
Second, if the rust spots are small, you might try 0000 steel wool and any decent gun oil and try to rub it out, but if it is pitted you might have to do what Norm suggested and buff it out and cold blue it. If you have to do that I would use "Brownells" OXPHO-BLUE, follow directions, this is the best cold blue I have ever used.
http://www.brownells.com/
papabear
First of all, welcome aboard, glad to have ya with us.
Second, if the rust spots are small, you might try 0000 steel wool and any decent gun oil and try to rub it out, but if it is pitted you might have to do what Norm suggested and buff it out and cold blue it. If you have to do that I would use "Brownells" OXPHO-BLUE, follow directions, this is the best cold blue I have ever used.
http://www.brownells.com/
papabear
POINT SHOOTER
Newbie bought a P-64
Welcome doctormike to a great forum with knowledgeable
members who have just the right rxs. for your P 64 pistol.
;D
members who have just the right rxs. for your P 64 pistol.
;D
Newbie bought a P-64
welcome, this is a really fun group and a gathering of some of the greatest minds on 9x18 pistols around!!
Newbie bought a P-64
On small rust spots, I have used Flitz polish with a soft rag and it buffs the rust out without taking the blue off ... How? I have NO idea, but it does smell like ammonia IIRC and that probably has something to do with its success. Some P64's can handle the 22# recoil spring without any mods to the spring and some can't ... you'll find out which you have soon enough! Also, if you really want to tame the recoil and don't mind spoiling the looks, the Hand-All Jr. from Hogue fits well and does help ... looks like hell, but it works.
Welcome aboard,
Saands
Welcome aboard,
Saands
Newbie bought a P-64
Howdy Doctormike . I agree with Saands, I have a Hogue grip made for the Makarov/Walther PPK , and i just cut off the bottom to the right length, and it works great at reducing recoil. It alo looks less attractive than the Grips made by members here at this forum, BUT, Function is great and comfort is much improved over the stock grip. another alternative is to reload ammo with reduced powder. Many members here can give you their recipes for many different powder loads and most are made to "soften" the kick of the P-64.
Personally , I found that the Hogue grip satisfies my hand and feels alot better. (at least until i can get a set from members here.) And at a $6-10$ price is a very fine fix ,even if only temporary. Also , you could try a glove during range practice to help relieve some of the kick.
The Hogue Grip was the fastest/cheapest/easiest Fix i could suggest to you. Good Luck and I hope this helps. Happy Shooting !! G
Personally , I found that the Hogue grip satisfies my hand and feels alot better. (at least until i can get a set from members here.) And at a $6-10$ price is a very fine fix ,even if only temporary. Also , you could try a glove during range practice to help relieve some of the kick.
The Hogue Grip was the fastest/cheapest/easiest Fix i could suggest to you. Good Luck and I hope this helps. Happy Shooting !! G
-
- Forum supporter
- Posts: 174
- Joined: March 30th, 2006, 5:05 pm
- Location: Knoxville, Tennessee
Newbie bought a P-64
doctormike,
Welcome to the forum! When I bought my P-64's, the recoil was so bad, that I said if I couldn't defend myself with the first five shots, I'd had the pistol to my assailant and let him put me out of my misery!
But, on this site, someone suggested holiding the pistol not quite so tight, and it made a very big diffrence. The addition of the new springs and that Hogue slip on grip has got my P-64's to the point where they are now downright comfortable to shoot.
So, for about an extra $25 and some time, you can have a pistol that is reliable, accurate, compact and built very well that won't bust your hand every time you shoot it.
Doctormike, I think the prognosis for you having a long and healthy relationship with your P-64 is great. I know of no one who has one of these that has voiced any regrets!
Again, welcome.
Welcome to the forum! When I bought my P-64's, the recoil was so bad, that I said if I couldn't defend myself with the first five shots, I'd had the pistol to my assailant and let him put me out of my misery!
But, on this site, someone suggested holiding the pistol not quite so tight, and it made a very big diffrence. The addition of the new springs and that Hogue slip on grip has got my P-64's to the point where they are now downright comfortable to shoot.
So, for about an extra $25 and some time, you can have a pistol that is reliable, accurate, compact and built very well that won't bust your hand every time you shoot it.
Doctormike, I think the prognosis for you having a long and healthy relationship with your P-64 is great. I know of no one who has one of these that has voiced any regrets!
Again, welcome.
Newbie bought a P-64
A way to take rust off a gun without damage is to use a brass shell casing, rub gently. It will remove rust w/out messing up the bluing.
Newbie bought a P-64
the first time I shot my P-64 it bit me pretty good, small railroad tracks does anyone else have or had that problem? My hands are not big.
Newbie bought a P-64
Also a question about the slip on grip the hogue, If later I want to remove it will it be easy or should I expect it to melt a little? I bought on today on Gary's advise. Thanks.
-
- Forum supporter
- Posts: 955
- Joined: March 23rd, 2006, 8:40 pm
- Location: delaware/Virginia eastern shor
Newbie bought a P-64
2 answers for 2 questions your hands might be big but I found it is all in the way you hold it. ..with it empty grip it and then work the slide to see the travel. or fire at range and be cognizant of the track.
2 answer the grip slips off no problem. they stretch on and off...
might be in Cleveland soon for a week or so Will be happy to show you what I mean.. actually will be in Medina and Wadsworth.
2 answer the grip slips off no problem. they stretch on and off...
might be in Cleveland soon for a week or so Will be happy to show you what I mean.. actually will be in Medina and Wadsworth.
Last edited by anjdrifter on August 31st, 2007, 7:40 pm, edited 1 time in total.
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
Newbie bought a P-64
michaelap
Try holding the gun lower on the grips , this common on small auto's , I have small hands and its happen me
to more times than I care to take about
NORM
Try holding the gun lower on the grips , this common on small auto's , I have small hands and its happen me
to more times than I care to take about
NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976
Newbie bought a P-64
anjdrifter, I sure do appreciate the offer I am actually very close to medina. I love this place I bought my P-64 because it was inexpensive and I wanted something smaller to carry, I was amazed to see what was being said about thes maks, P-64 etc. Really made me feel like I stumbled onto something really cool.
Newbie bought a P-64
And Norm, will do next time, I actually didn't notice until we were in the car after. My wife noticed first while I was driving.