Photo of new sight dots

brigade · Post by **brigade** » June 6th, 2007, 11:39 pm

Here is the latest photo of a P64 of mine with sight dots. I got the special paint from KG Industries.
It has made a difference for me at the range.
-Troy

duggi60 · Post by **duggi60** » June 7th, 2007, 1:56 am

Great sight dots -- do you have a web sight link to this company?

bzinggg · Post by **bzinggg** » June 7th, 2007, 2:55 am

FondofPhoto

;D

nbender · Post by **nbender** » June 7th, 2007, 8:03 am

TTH you do fine photography.

dolang1 · Post by **dolang1** » June 7th, 2007, 7:54 pm

TTh, My CZ-82 has white dots, but your dots look brighter. Since you have seen the white dots on a CZ-82, are your dots really that much brighter? Thanks Don

carguy · Post by **carguy** » June 7th, 2007, 11:25 pm

Could we paint over the CZ-82 white dots or would they have to be removed first? Even if I just wanted to reapply a brighter white, would I need to remove the current painted dots?

Post by **normsutton** » June 8th, 2007, 4:51 am

carguy

yes you can paint over the white dots if they are not to thick to begin with
I use a tooth pick

NORM

brigade · Post by **brigade** » June 8th, 2007, 7:43 am

Yes it can be applied over an existing sight or regular steel. Prep the area with rubbing alchohol first then use. The dots can be removed and re-applied whenever. It is very bright but does not glow in the dark though.
-Troy

grayfox · Post by **grayfox** » June 8th, 2007, 8:30 am

Nice!!!!

drogers · Post by **drogers** » June 12th, 2007, 2:35 pm

Does Site Kote seem to be fairly durable?
Don

brigade · Post by **brigade** » June 12th, 2007, 4:50 pm

It's ok. But not permanant. It stands up to general use and regular cleaning. However, I use a simple green degreaser and that seems to make it want to chip off after a few cleanings. The little bottle has enough to do probably 10,000 guns so you will never run out of it and it takes a few minutes to apply and dries in about 10 min in front of a fan. I am thinking about using the Florescent Duracoat orange which would be permanant and highly resistant to all solvents.

Post by **papabear** » June 12th, 2007, 7:54 pm

TTH,

I bought some "Testors acrylic paint at Wally World back some time ago, its for model cars/air plains and such, @ $.97 cents ea and it works well for me. I usually clean the outside of my pistols with Eezox, and really don't have a problem with the paint coming off, but in time they all do come off, but usually I just chip if off and change colors. Just my $0.97 worth.

papabear

truth · Post by **truth** » June 12th, 2007, 8:32 pm

+1 with Papa-Bear and The Holy Ghost tooooooo....

truth · Post by **truth** » June 12th, 2007, 8:37 pm

You do fine work, really nice. You know it is a gift?? The same as creating carvings or pottery or canvas... There is talent in every pic you post.

brigade · Post by **brigade** » June 12th, 2007, 9:25 pm

Thank you.

The Unofficial P64 Resource Forum