Feg R61 Firing Pin Broke

[jdking1968]

My firing pin on my Feg R61 sheared off. Anyone happen to know where I can get one? I'm pretty sure the firing pin from a Feg PA-63 will work also. Not sure about any others. Thanks

[normsutton]

jdking1968
you need to take the slide off, look at the bottom of the slide, if it looks like the one on the left witch is a BR-61 it won't fit, if it looks like the one on e on the right witch is a PA-63 it should fit,

good luck finding one, maybe gun broker
NORM

[jdking1968]

Norm,

Thanks, mine looks like the one on the right. At least now I know it will work. Now the nearly impossible part of finding one.

Jeff

[Curly1]

Give these guys a call and let us know how you make out.

http://www.poppertsgunparts.com/contact.htm

http://www.jackfirstgun.com/order.php

[bear34]

http://www.ebay.com/itm/Feg-R61-9mm-Mak ... 0814753473

[jdking1968]

Thanks for all the tips. I ended up find a firing pin for a Feg PA-63. I was told it would work. Now I am missing the firing pin spring. I spoke to someone at Wolf and he said he didn't have one in front of him but didn't think they were the same. I'm thinking they should be the same or the firing pin I ordered probably won't work either. I am thinking about buying a spring set from Wolf to just try it out. Anyone have any experience? Does anyone know what the stock tensions are for the recoil,firing pin and hammer springs?

Thanks again. You guys are great.

Jeff

[normsutton]

Jeff
I used the same hammer spring kit they sell for my BR-61 as the PA-63,the recoil spring has to be trimed

BR-61


PA-63






NORM

[jdking1968]

Nice. Thanks for posting the instructions on swapping out the springs. It looks like Wolff is out of the springs for the BR-61. I found a firing pin spring for a PA-63 on another site. That should work right?

Jeff

[normsutton]

Jeff
yes it work

norm

[jdking1968]

Thank you for being so much help. I sent an email to Wolff springs to see if they happened to have some of the BR-61 kits still available and just not on their website.

Once again. Thank you.
Jeff King

[normsutton]

Jeff
all they is the PA-63 and that will work except on the the recoil spring

NORM

[Curly1]

Do they have more PA63 firing pins where you got yours?

[jdking1968]

It doesn't look like it. Maybe they'll get some more in.

http://www.thedealershowroom.com/search ... rch=Search

Jeff

[Curly1]

Thanx for the link Jeff that is one source I did not have.

Let us know how it works out.