9x18 Revolver

Discussion with questions, answers, and everything else about all other 9x18's
Post Reply
MakAttack
Member
Member
Posts: 126
Joined: April 13th, 2010, 4:37 pm

9x18 Revolver

Post by MakAttack » April 10th, 2012, 3:33 pm

Stumbled upon this, wonder if it'll be available in the US anytime soon? :

http://www.arcus-bg.com/

Image

technical data

Caliber:

.38 Special
.357 Magnum
9 x 19 mm Luger (Parabellum)
9 x 18 mm Makarov

Cylinder Capacity:
6-rounds

Overall length:
with 4 inch barrel
238 mm (9.37 inches)

with 2.5 inch barrel
200 mm (7.87 inches)

Overall height:
142 mm (5.59 inches)

Overall width:
36.5 mm (1.44 inches)

Weight (empty):
with 4 inch barrel
Less than 1000 g (35.3 oz)

with 2.5 inch barrel
Less than 900 g (31.8 oz)

The ARCUS 95 R revolver is available in all specified calibers and upon request in different combination sets with interchangeable barrels and cylinders.

User avatar
Curly1
Elite member
Elite member
Posts: 2461
Joined: September 20th, 2011, 11:35 pm
Location: Upstate NY

Re: 9x18 Revolver

Post by Curly1 » April 10th, 2012, 4:43 pm

A Mak snubby would be interesting.

Remeber the Medusa/

http://www.youtube.com/watch?v=fkY_5Nz649s
Laugh Hard and Often.

Gary

Frank Mucciolo
Junior member
Posts: 21
Joined: April 4th, 2012, 6:59 pm

Re: 9x18 Revolver

Post by Frank Mucciolo » April 10th, 2012, 10:14 pm

A light weight two inch barrel would be great.

A Southern Yank

MakAttack
Member
Member
Posts: 126
Joined: April 13th, 2010, 4:37 pm

Re: 9x18 Revolver

Post by MakAttack » April 12th, 2012, 2:18 pm

Curly1 wrote:A Mak snubby would be interesting.

Remeber the Medusa/

http://www.youtube.com/watch?v=fkY_5Nz649s

Medusa= my thoughts exactly! Get all three cylinders, if the barrel could handle the difference between 9x18 & 9x19 ( .008" ) that'd be so sweet...

User avatar
p64-1973
Member
Member
Posts: 56
Joined: March 6th, 2012, 2:36 am
Location: Indiana

Re: 9x18 Revolver

Post by p64-1973 » April 13th, 2012, 12:31 pm

Is the gun, in the 9x18 caliber, have a cylinder that is made to hold rimless cartridges? If not, they better have some moon clips to go with it.
Those who beat their weapons into plows will do nothing, but till the soil for those who do not.

User avatar
DoubleTap
Member
Member
Posts: 149
Joined: January 18th, 2011, 8:51 pm
Location: Ohio
Contact:

Re: 9x18 Revolver

Post by DoubleTap » April 13th, 2012, 3:15 pm

p64-1973 wrote:Is the gun, in the 9x18 caliber, have a cylinder that is made to hold rimless cartridges? If not, they better have some moon clips to go with it.
No moon clips. You can only shoot it straight up in the air. :shock:

User avatar
surfzombie
Member
Member
Posts: 181
Joined: June 29th, 2010, 10:07 pm
Location: Utah

Re: 9x18 Revolver

Post by surfzombie » May 17th, 2012, 5:29 pm

They are not available in the US. I first saw them back in 07 and wanted one back then but for some reason not imported. I would take one in 9mm Mak and 9mm Luger if they were available. at a decent price.

big54r
Member
Member
Posts: 104
Joined: November 29th, 2008, 3:07 am
Location: Metro Houston

Re: 9x18 Revolver

Post by big54r » June 27th, 2012, 1:30 pm

ahh...the Medusa...originally made in Conroe,TX iirc...

Post Reply