CZ-82 Disassembly
Re: CZ-82 Disassembly
Hello
I am new here.
I have a cz 83 that is in bad need of refinishing. I have cerakoted a few of my gun now and want to do this one as well.
I have been searching for complete disassembly instructions.
I tried to get the link to work but did not have any luck.
I was wondering if their was a different link or a nother place to try to look.
thanks again for your help
I am new here.
I have a cz 83 that is in bad need of refinishing. I have cerakoted a few of my gun now and want to do this one as well.
I have been searching for complete disassembly instructions.
I tried to get the link to work but did not have any luck.
I was wondering if their was a different link or a nother place to try to look.
thanks again for your help
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
Re: CZ-82 Disassembly
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976
Re: CZ-82 Disassembly
The auto safety will make you go mad unless you install it as one piece held together with toothpicks. Then just use the pins to push the toothpicks out. I have PDF files on the CZ-82 Disassembly but I can't post them here. PM me. You will need an extra one or two of these..https://www.buymilsurp.com/slide-stop-s ... 42176.html
Re: CZ-82 Disassembly
Thank you guys so much.
I do feel a bit stupid. Most of the links I found when doing my search came up with an error or expired page.
Was thinking for a bit I was going to have to pay someone to do the refinish.
anyway thanks again
I do feel a bit stupid. Most of the links I found when doing my search came up with an error or expired page.
Was thinking for a bit I was going to have to pay someone to do the refinish.
anyway thanks again
Re: CZ-82 Disassembly
Are the sight difficult to remove?
Also would it a good idea to soak the gun before disassemble? diesel?
Also would it a good idea to soak the gun before disassemble? diesel?
Re: CZ-82 Disassembly
Laugh Hard and Often.
Gary
Gary
Re: CZ-82 Disassembly
Sights come off easy. Front is pinned get the right punch. new Sights are available from CZ USA. Don't soak it. get one of these......https://www.buymilsurp.com/cz82-spring- ... 42319.html
Re: CZ-82 Disassembly
I will be putting the cz83 back together tonight. Will post a pic when done.
How is the cz75 to disassemble and reassemble?
How is the cz75 to disassemble and reassemble?
Re: CZ-82 Disassembly
Haven't had the need to take mine apart.........
Re: CZ-82 Disassembly
Any advice on the auto safety and sear spring.
Having a lot of trouble getting the spring on the auto safety.
I would have not taken it apart but I had to cerakote it. It has some pretty good rust. it was like that when I bought it.
Having a lot of trouble getting the spring on the auto safety.
I would have not taken it apart but I had to cerakote it. It has some pretty good rust. it was like that when I bought it.
Re: CZ-82 Disassembly
Got it back together.
Everything seems to work.
Some time the trigger does not reset. Just a slight pull of the hammer and then it does. It might be friction from the cerakote. It was a somewhat tight fit I guess.
Here she is. I an not a professional but it does not look to bad in person.
Everything seems to work.
Some time the trigger does not reset. Just a slight pull of the hammer and then it does. It might be friction from the cerakote. It was a somewhat tight fit I guess.
Here she is. I an not a professional but it does not look to bad in person.
Re: CZ-82 Disassembly
I'm looking for an exploded view of the cz-82 anyone have one or know of a good one somewhere that's easily viewed?
Re: CZ-82 Disassembly
Laugh Hard and Often.
Gary
Gary
Re: CZ-82 Disassembly
Now I have a matching pair! One CZ-83 and a CZ-82!
Look what I got for my Colt 1908 .380!
I added a Husqvarna 1907 to my collection also along with an Original 1907 browning Long Barrel! Picked it up at a gun show here in Tucson for 95.00! Couldn't pass it up! Made my own 9 Browning Longs from cut down 9 MM Largo cases. I can shoot either .380's out of it with the sleeved barrel or shoot Factory 9 MM Browning Longs or my homemade 9 Browning Longs out of it! Neat old pistol and parts are still available for it!
Look what I got for my Colt 1908 .380!
I added a Husqvarna 1907 to my collection also along with an Original 1907 browning Long Barrel! Picked it up at a gun show here in Tucson for 95.00! Couldn't pass it up! Made my own 9 Browning Longs from cut down 9 MM Largo cases. I can shoot either .380's out of it with the sleeved barrel or shoot Factory 9 MM Browning Longs or my homemade 9 Browning Longs out of it! Neat old pistol and parts are still available for it!