PA-63 I Need a little help

Discussion with questions, answers, and everything else about all other 9x18's
michaelap
Senior member
Senior member
Posts: 278
Joined: August 29th, 2007, 10:08 am
Location: NE OHIO

PA-63 I Need a little help

Post by michaelap » November 6th, 2010, 4:32 pm

I bought a pa-63 ($91.00) from auction arms and the seller listed one problem he said it needs a "shell ejector" can anyone help me out with this one?

gloob
Junior member
Posts: 45
Joined: March 30th, 2008, 7:38 am

Re: PA-63 I Need a little help

Post by gloob » November 10th, 2010, 5:06 pm

Do you mean ejector or extractor? The ejector is just a nub on the end of the slide lock. In either case, you can probably find the part(s) on buymilsurp.com. If you don't find it listed under PA-63, check under AP-7. All the parts except the barrel should interchange.

If it's the slidelock that's missing, you'll probably need a new slidelock spring, too.

If it's the extractor, make sure you have the extractor retaining pin, spring, and safety detent pin. All of those parts are held in by the extractor.

Mine rather quickly broke a FP spring and a trigger return spring. So you might want to look into buying spares for those while you're at it. Actually Wolff makes good FP, main, and recoil springs.

michaelap
Senior member
Senior member
Posts: 278
Joined: August 29th, 2007, 10:08 am
Location: NE OHIO

Re: PA-63 I Need a little help

Post by michaelap » November 10th, 2010, 5:17 pm

"Do you mean ejector or extractor?"

I don't know, It hasn't arrived yet and the seller only listed what he called "shell ejector" when I have it in hand I will look up the parts.

Thanks for the reply, it looks like the rest of our regulars just couldn't be bothered!

User avatar
juniustaylor
Elite member
Elite member
Posts: 1408
Joined: February 9th, 2010, 10:56 pm
Location: KV, MO
Contact:

Re: PA-63 I Need a little help

Post by juniustaylor » November 10th, 2010, 10:18 pm

If it's the shell ejector then I highly doubt it's the extractor. I looked on one of those milsurp websites the other night as well as gunbroker and did not find anything available for purchase. You're going to be waiting a while unless you can fabricate something yourself.

michaelap
Senior member
Senior member
Posts: 278
Joined: August 29th, 2007, 10:08 am
Location: NE OHIO

Re: PA-63 I Need a little help

Post by michaelap » November 11th, 2010, 7:21 am

juniustaylor

Boy I thought I found a deal. Only $91.00 but if I can't find the part......

User avatar
mikeh1
Senior member
Senior member
Posts: 204
Joined: May 25th, 2007, 6:58 pm
Location: Van Nuys, CA USA
Contact:

Re: PA-63 I Need a little help

Post by mikeh1 » November 12th, 2010, 12:44 am

two places I know of are out of stock, but you can check to see if and when they will get more

http://www.surplusfirearms.com/store/ej ... -5348.html

http://www.buymilsurp.com/ejector-hunga ... -5348.html

michaelap
Senior member
Senior member
Posts: 278
Joined: August 29th, 2007, 10:08 am
Location: NE OHIO

Re: PA-63 I Need a little help

Post by michaelap » November 19th, 2010, 6:00 pm

Just got it today and it is the extractor, and extractor plunger. At least the spring is available.

User avatar
juniustaylor
Elite member
Elite member
Posts: 1408
Joined: February 9th, 2010, 10:56 pm
Location: KV, MO
Contact:

Re: PA-63 I Need a little help

Post by juniustaylor » November 19th, 2010, 10:13 pm

You may try a feller in Arkansas. Gun Garage is the name of his business, saw him at a couple gunshows in Park City, KS and he's pretty helpful. (479) 524-2038 is his number. Can't remember his name off the top of my head though. If he doesn't have it, he can sometimes point you in a direction where you may find it. I'll keep my eyes peeled and if I see anything, I'll reply back on here.

Edit: I think his name is Al, Al Bolduc. < Something like that.

michaelap
Senior member
Senior member
Posts: 278
Joined: August 29th, 2007, 10:08 am
Location: NE OHIO

Re: PA-63 I Need a little help

Post by michaelap » November 20th, 2010, 11:51 am

juniustaylor,
Thank You!

User avatar
chimera
Junior member
Posts: 41
Joined: January 24th, 2008, 8:18 am
Location: richmond va

Re: PA-63 I Need a little help

Post by chimera » November 29th, 2010, 11:31 pm

Numrich lists the extractor, spring and plunger (pin).
Look under Kassnar, PMK or Interarms, PPH.
The safety plunger can be made from a drill or a ball bearing the correct diameter.

User avatar
juniustaylor
Elite member
Elite member
Posts: 1408
Joined: February 9th, 2010, 10:56 pm
Location: KV, MO
Contact:

Re: PA-63 I Need a little help

Post by juniustaylor » November 30th, 2010, 12:09 am

Chimera sure is right. I had read that Numrich had them under a different name but couldn't for the life of me remember it. - http://www.gunpartscorp.com/catalog/Pro ... atid=10186

+1 chimera

michaelap
Senior member
Senior member
Posts: 278
Joined: August 29th, 2007, 10:08 am
Location: NE OHIO

Re: PA-63 I Need a little help

Post by michaelap » December 7th, 2010, 10:12 pm

under PMK I found the three parts I need (extractor) but it lists for a 380 are these parts interchangeable? in both 9mm and the 380

User avatar
chimera
Junior member
Posts: 41
Joined: January 24th, 2008, 8:18 am
Location: richmond va

Re: PA-63 I Need a little help

Post by chimera » December 7th, 2010, 11:10 pm

No difference, the barrel is the only part that is different between a 9X18 and a .380 FEG.

michaelap
Senior member
Senior member
Posts: 278
Joined: August 29th, 2007, 10:08 am
Location: NE OHIO

Re: PA-63 I Need a little help

Post by michaelap » December 8th, 2010, 7:47 am

great news thanks

michaelap
Senior member
Senior member
Posts: 278
Joined: August 29th, 2007, 10:08 am
Location: NE OHIO

Re: PA-63 I Need a little help

Post by michaelap » December 14th, 2010, 4:30 pm

Got the parts and no good, they are not the same. I should have known better.

Post Reply