FEG SMC 918

Discussion with questions, answers, and everything else about all other 9x18's
Post Reply
raz
Junior member
Posts: 30
Joined: March 15th, 2008, 5:08 pm

FEG SMC 918

Post by raz »

I just picked this up at a show today and am looking for another mag. The P63 mags fit, but a bit long. Any ideas where to find one?
Also...what about springs? Can I use P63 hammer and firing pin springs, or will they be way off?
raz
tooldawg99
Member
Member
Posts: 65
Joined: May 6th, 2009, 6:14 pm

FEG SMC 918

Post by tooldawg99 »

I'd suggest looking here first: if you can't find it listed, call them: their inventory is pretty substantial.

http://www.e-gunparts.com/
normsutton
Global moderator
Global moderator
Posts: 3575
Joined: February 26th, 2006, 6:59 am
Location: LAKELAND FL.

FEG SMC 918

Post by normsutton »

raz

the springs will work , you will have to cut the recoil spring to the size of the original spring
but will work

NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976

ImageImage
raz
Junior member
Posts: 30
Joined: March 15th, 2008, 5:08 pm

FEG SMC 918

Post by raz »

Thanks, folks. So far it is working fine...I'll need to see if Dennis can do grips with a thumb rest.
raz
pshootr
Senior member
Senior member
Posts: 287
Joined: December 3rd, 2005, 6:56 pm
Location: Central Florida

FEG SMC 918

Post by pshootr »

He has these. http://www.marschalgrips.com/
Image
Image

The 22# Wolff recoil spring for the P-64 will work, but you must cut about 1 coil off of it.

Mags are just about impossible to find, but the PA-63 mags work, they just hang down.

Hoosier Gun Works claims they have 4 Triple K mags with finger extensions for $22 each. About half way down the page.
http://www.hoosiergunworks.com/catalog/ ... istol.html
Last edited by pshootr on June 15th, 2009, 3:40 am, edited 1 time in total.
raz
Junior member
Posts: 30
Joined: March 15th, 2008, 5:08 pm

FEG SMC 918

Post by raz »

Thanks again. I've got Dennis' grips on my P64 and two CZ82s. I'd like a thumb rest for the P63 or SMC918. Maybe I can talk him into making them. I've used the 63 mags....sort of awkward.
Is the SMC 380 or the Triple K" the same mag as the 918?
raz
pshootr
Senior member
Senior member
Posts: 287
Joined: December 3rd, 2005, 6:56 pm
Location: Central Florida

FEG SMC 918

Post by pshootr »

As long as it is a 6 round FEG mag for either the .380 or Mak it should be the same. The .380 and 9mm Mak use the same mag. They are either 6 round for the small frame guns or 7 round for the standard size pistols.
Post Reply