PA-63 and P-64?

darrell · Post by **darrell** » August 10th, 2009, 12:22 pm

I own both and have shot both. The PA-63 with an extra power recoil spring and Handall Jr. grip is easier on me to shoot and has an extra round. If you are going to use high power rounds such as Pow'r Ball, the P-64 might be a better choice. For Silver Bear hollow points and FMJ, I would take the PA-63 personally. Either would be okay and it is really a matter of personal preference.

angus6 · Post by **angus6** » November 7th, 2009, 8:54 pm

Thanks for the side by side pics , wifey is intrested in the 63 from talking with a ole guy at the range

atbackpackin · Post by **atbackpackin** » January 31st, 2010, 9:18 am

Hey Norm, did you refinish your PA-63 yourself? If so could you please tell me what you did. I am looking to do something similar and would really appreciate any help you could lend.

Thanks,
Shawn

Post by **normsutton** » January 31st, 2010, 10:49 am

Shawn

no I don't have the equipment to do hard chroming , I sent it to http://www.elitecustomguns.com , if you are doing a PA-63 just send him the slide

NORM

atbackpackin · Post by **atbackpackin** » January 31st, 2010, 8:57 pm

Thanks for the link Norm. Did you polish your frame? Or was it already polished? If you did polish it, care to share your method.

I recently bought a PA-63 and I must say I truly like it a lot. But........the finish does leave something to be desired.

Any info you can offer would be greatly appreciated.

Shawn

Post by **normsutton** » January 31st, 2010, 9:05 pm

Shawn

yes I polished it I have a buffing lath

NORM

layer · Post by **layer** » February 25th, 2010, 1:47 am

6x6pinz wrote:simple answer, get both:)

This! And throw in a CZ82 for good measure!

stover · Post by **stover** » February 25th, 2010, 2:10 am

" The P-64 has that screwy European magazine well mag release. "

After a few times drawing from your pocket and watching your magazine fall to the floor you may change your mind. I prefer the heel release for deep concealment pistols. Many times I have accidentally dropped the mag on a Kel-Tec 3AT. I reach for the P64 first because of the release and caliber, only carry the Kel-Tec when nothing else will work.

music300 · Post by **music300** » March 16th, 2010, 1:15 pm

stover, I carry a Kel Tec all the time but am looking for a 64. How much difference in pocket carry is there between the two? I like the P3AT because of the size and it seems to "disappear". John

stover · Post by **stover** » March 16th, 2010, 1:40 pm

Unfortunately the P64 is just a tad too big except for a few pairs of jeans I wear. I've carried it in a front pocket or in my back pocket with an untucked shirt to cover the exposed back strap.
For dress slacks the P3AT is the only way to go.
I carry a Bulgarian Makarov most of the time with the P64 pulling back up duty. When pocket carry is the only option -- I carry the P3AT.

music300 · Post by **music300** » March 17th, 2010, 9:14 am

Thanks, I just haven't found anything else that is quite as comfortable. John

robalan · Post by **robalan** » March 17th, 2010, 4:38 pm

I think two P64s would do just fine. Whenever possible carry them both and an extra mag that will fit in either of them.

The Unofficial P64 Resource Forum

PA-63 and P-64?

PA-63 and P-64?

PA-63 and P-64?

PA-63 and P-64?

PA-63 and P-64?

PA-63 and P-64?

PA-63 and P-64?

PA-63 and P-64?

PA-63 and P-64?

Re: PA-63 and P-64?

Re: PA-63 and P-64?

Re: PA-63 and P-64?

Re: PA-63 and P-64?