P64 ASSEMBLY/DISASSEMBLY/PARTS MANUAL

Previous Sticky Threads and other good info. Check this out first!
User avatar
arex
Junior member
Posts: 22
Joined: November 17th, 2006, 3:08 am
Location: Grand Junction, CO

P64 ASSEMBLY/DISASSEMBLY/PARTS MANUAL

Post by arex » June 12th, 2007, 10:16 pm

Given the amount of work that went into these documents...might I suggest that you put clear copyright notices on both, even though you're giving them away for free. There's little to stop an unscrupulous individual from using any or all of your photographs for their own profit.

brigade
Senior member
Senior member
Posts: 300
Joined: January 13th, 2007, 2:52 pm
Location: Kansas
Contact:

P64 ASSEMBLY/DISASSEMBLY/PARTS MANUAL

Post by brigade » June 13th, 2007, 9:13 am

arex... Thank you for the suggestion, I appreciate that. However, I am ok with it the way it is. I think that as long as it is here free then it can be found by people who are looking for it. I did it to assist anyone who might need it and its ok if someone wants to use the photos. I did it for all of us and hope it does get used alot.

bzinggg
Forum supporter
Forum supporter
Posts: 487
Joined: May 30th, 2006, 2:17 pm
Location: Texas

P64 ASSEMBLY/DISASSEMBLY/PARTS MANUAL

Post by bzinggg » June 14th, 2007, 4:26 am

You're alright! No matter what the Captain said.......

(That's a joke! ;D 8-) ;D)

When I say that to my wife, she tells me where the Capt. can put it. ;D I just love to see those green eyes flash though!

b.
Last edited by bzinggg on June 19th, 2007, 4:28 pm, edited 1 time in total.

drboomboom
Junior member
Posts: 12
Joined: August 23rd, 2007, 7:19 am

P64 ASSEMBLY/DISASSEMBLY/PARTS MANUAL

Post by drboomboom » September 9th, 2007, 8:57 pm

Troy, let me get in line here and give you a big "Thanks!" This will make life easier.

User avatar
gotmak
Member
Member
Posts: 151
Joined: November 4th, 2006, 8:38 pm
Location: Indy

P64 ASSEMBLY/DISASSEMBLY/PARTS MANUAL

Post by gotmak » October 27th, 2007, 6:27 am

I have been away from this forum too long. I was waiting for this manual to do a take down on my P-64, I forgot to get back here and download it. Now that I have, I just wanted to say you have once again out done yourself. I don't think we should take for granted, all the work you have done, not only on this project but others, and the selflessness that has to be a part of them all getting done. Outstanding work my friend! Your kids are a lucky group, they get all that great knowledge and spirit of excellence passed on to them. Thanks again, oh, and what is the next project you will be taking on? World peace? Good luck on that one! :(

blitz
Posts: 1
Joined: November 19th, 2007, 9:06 pm

P64 ASSEMBLY/DISASSEMBLY/PARTS MANUAL

Post by blitz » November 19th, 2007, 10:12 pm

Troy,

Got one of these about a year ago to ultimately be used for carry. Finally got a chance to wring it out a few weeks ago at the range and was surprised at how aggressive the recoil was and how stiff the trigger pull was in DA. Looked around for parts and got a Wolff recoil spring which came with a new firing pin spring and a set of 18,19, and 20# hammer springs. Didn't have a problem with the recoil spring other than figuring out just how to hold my mouth getting the slide back on. Didn't anticipate any problem with the hammer spring, but your trick with the paper clip is sure going to make that easier. The firing pin had me scratching my bald spot for quite a while. Thanks to the effort you put into creating these manuals this will be a couple of hours rather than the better part of a day. You're a great humanitarian!!

Thank you,

blitz

brigade
Senior member
Senior member
Posts: 300
Joined: January 13th, 2007, 2:52 pm
Location: Kansas
Contact:

P64 ASSEMBLY/DISASSEMBLY/PARTS MANUAL

Post by brigade » November 30th, 2007, 3:06 am

Your welcome. Now when I am dead something will be left floating on the internet I created. Good luck with your life and live good. Happy shooting.
-Troy

ursishoribilis
Junior member
Posts: 12
Joined: December 29th, 2007, 7:22 pm

P64 ASSEMBLY/DISASSEMBLY/PARTS MANUAL

Post by ursishoribilis » January 7th, 2008, 11:44 pm

I cannot get the manuals to open. Is it me or is there a problem?

User avatar
manicmechanic
Veteran member
Veteran member
Posts: 610
Joined: November 19th, 2006, 8:28 pm
Location: michigan, down the river

P64 ASSEMBLY/DISASSEMBLY/PARTS MANUAL

Post by manicmechanic » January 8th, 2008, 1:29 am

E-mail sent

ursishoribilis
Junior member
Posts: 12
Joined: December 29th, 2007, 7:22 pm

P64 ASSEMBLY/DISASSEMBLY/PARTS MANUAL

Post by ursishoribilis » January 8th, 2008, 11:26 am

E-mail sent
Thanks Manicmechanic, All I can say is WOW!! Those are wonderful and will be very helpful. Excellent work Troy. Thanks

User avatar
dfunk
Site Admin
Site Admin
Posts: 1872
Joined: November 6th, 2005, 11:16 am
Location: Earth
Contact:

P64 ASSEMBLY/DISASSEMBLY/PARTS MANUAL

Post by dfunk » January 9th, 2008, 10:27 am

If someone would forward me a copy, I'll host it since the links are dead. No use in this being a sticky if the links don't work. Thanks!

User avatar
manicmechanic
Veteran member
Veteran member
Posts: 610
Joined: November 19th, 2006, 8:28 pm
Location: michigan, down the river

P64 ASSEMBLY/DISASSEMBLY/PARTS MANUAL

Post by manicmechanic » January 9th, 2008, 12:18 pm

E-mail sent

User avatar
bobtx
Member
Member
Posts: 87
Joined: December 23rd, 2007, 3:29 pm
Location: San Antonio, TX USA
Contact:

P64 ASSEMBLY/DISASSEMBLY/PARTS MANUAL

Post by bobtx » January 9th, 2008, 5:59 pm

Great guys....thanks for jumping on this!

Bob

User avatar
dfunk
Site Admin
Site Admin
Posts: 1872
Joined: November 6th, 2005, 11:16 am
Location: Earth
Contact:

P64 ASSEMBLY/DISASSEMBLY/PARTS MANUAL

Post by dfunk » January 13th, 2008, 12:49 am

Okay, here are good permalinks to these files:
{removed to sub section}

Thanks to Troy for these files. Simply great.
Last edited by dfunk on March 4th, 2008, 9:59 pm, edited 1 time in total.

User avatar
bobtx
Member
Member
Posts: 87
Joined: December 23rd, 2007, 3:29 pm
Location: San Antonio, TX USA
Contact:

P64 ASSEMBLY/DISASSEMBLY/PARTS MANUAL

Post by bobtx » January 13th, 2008, 11:48 am

Thanks y'all!!

Bob

Locked

Who is online

Users browsing this forum: No registered users and 1 guest