P-Iron, mag release installation.

Mods and Fixes by P-64 users...
Post Reply
Polishiron68
Member
Member
Posts: 60
Joined: March 31st, 2016, 8:02 am

P-Iron, mag release installation.

Post by Polishiron68 »

Greetings all.
Some of you have requested guidance in using my, fairly new , Over-molded/Extended Mag. Release Lever with the OEM Grip panels.
That was not the intended purpose of the installation. However I have come to realize that it is popular enough with the "OEM gripsters", that I can offer guidance on a simple modification to the grip panels that I can fully support.
For images and brief narrative on each image. See the Flickr link below.

https://flic.kr/s/aHskDK2znV

And this:

Polish Iron Grips
Overmolded Mag. Release Lever:
When used with the v.05 grip or other aftermarket, Polish Iron Grips. modification of the grip is not necessary.

However some wish to use the mag. lever with their P-64 OEM, grips.
A modification to the grip is necessary for the Mag. Release lever to function properly.

The operation is straight forward therefore requires little narrative.
Please refer to the simple before and after images. And the various images in different views for clarification.
I personally like the modification and support the operation in conjunction with my Overmolded Mag. Release Lever.

Please feel free to contact me with any questions.
As always, "Thank You", to the community for your continued support.
polishiron68@gmail.com

Regards,
Russ...
Post Reply