Trigger wont set...newbie help here

Mods and Fixes by P-64 users...
Post Reply
RebelPanda
Posts: 5
Joined: November 23rd, 2012, 9:17 pm

Trigger wont set...newbie help here

Post by RebelPanda » November 23rd, 2012, 9:25 pm

Got my P64 took her to the range.
With a loaded mag and one in the chamber I slid the safety off to fire double action, when I did so the trigger fall back like it was single action... The hammer didn't move. I flicked the safety on and off with no luck. Finally I pressed down on the slid and I herd the trigger re set... I fired several magazines through her no issues... so I "Tested" it. I put the safety on then off and the same issue.

So after I hit the decocker and keep the safety on, then push the safety up to fire... my trigger wont re set.


I got the wolf springs, haven't put them in yet.

RebelPanda
Posts: 5
Joined: November 23rd, 2012, 9:17 pm

Re: Trigger wont set...newbie help here

Post by RebelPanda » November 23rd, 2012, 10:55 pm

I've decided it might be the hammer spring... idk, it re sets the trigger when I lightly push on it while its down once I tak the safety off

RebelPanda
Posts: 5
Joined: November 23rd, 2012, 9:17 pm

Re: Trigger wont set...newbie help here

Post by RebelPanda » November 23rd, 2012, 10:55 pm

any help or advice would be greatly appreciated

RebelPanda
Posts: 5
Joined: November 23rd, 2012, 9:17 pm

Re: Trigger wont set...newbie help here

Post by RebelPanda » November 24th, 2012, 3:14 am

so nothing?

User avatar
RobsTV
Member
Member
Posts: 94
Joined: January 5th, 2012, 6:49 pm
Location: W. Central Florida

Re: Trigger wont set...newbie help here

Post by RobsTV » November 24th, 2012, 7:59 am

Sometimes it might take a day for replies to start flowing in. But they will.

Issue sounds familiar.

Check out this thread for starters, which after trying many different things, finally lead to the fix for me.

Here is some of what is posted there:

"While the problem I am having was limp trigger when moving safety from safe to fire, the video brought up a point that I had not messed with."

viewtopic.php?f=3&t=4803

And here was my original post on similar issue:
viewtopic.php?f=1&t=4771

User avatar
Curly1
Elite member
Elite member
Posts: 2449
Joined: September 20th, 2011, 11:35 pm
Location: Upstate NY

Re: Trigger wont set...newbie help here

Post by Curly1 » November 24th, 2012, 12:11 pm

Welcome to the forum.

Yes start with the link above if no luck let us know and we can go from there.

Long Hoilday weekends will affect traffic on the forum so just hang in there.
Laugh Hard and Often.

Gary

RebelPanda
Posts: 5
Joined: November 23rd, 2012, 9:17 pm

Re: Trigger wont set...newbie help here

Post by RebelPanda » November 25th, 2012, 5:16 am

lol didn't wanan sound impatient was drinking when posting... as I am now, I'll read up now then fix her tomorrow.

Post Reply