The Unofficial P64 Resource Forum

Hello everyone, this is my first time posting to this site. I found it when I first bought my P-64 a few months ago. So I have been lurking a little before.

But to the main subject. I fell in love with the P-64. Its a great little gun, but I didn't care much for the small hidden mag release. Its a little difficult to use. So I decided to make a new one. I figured others may feel the same as I do, so I'm offering to make them for you. This is something I do on my free time. So they are made per order with a limit of 2 at a time. They are made of hardened 4140 steel and come machined and debured, but need finishing(bluing). I don't have the means to give them a finish at this time. I can make them of other materials, but depending on the material it may change prices. The standard 4140 release cost $35 + shipping. I do not know how much interest there is in this, but as a safety measure, if orders start stacking up I will stop taking them until I can catch up. I don't want people placing an order and waiting forever to get one. Feel free to ask questions you may have.

That is real nice looking! I don't have interest in it right now but I may later on down the road. Surely you'll have some takers on this offer. I like it.

Interesting. Have you had any issues with the extended release snagging during CC and causing unintentional mag release?

As for finish, have you considered Duracoat or, perhaps Stainless Steel (or maybe an appropriate grade of aluminum)?

Peace favor your sword,
Kirk

I have not tested the cc situation. I'm from WI and cc just started to today actually, so it was not something I normally thought about. But I do carry it in a paddle holster when I'm hunting and working in my swamp and it hasn't been a problem. I know its a very different form of carry, but its all I can offer at the moment.

I have thought about different finishing options. But there are so many options, I thought it best to let the buyer decide for them self at this time. I also have no means of doing it in a cost effective way. I guess if requested I could give it a bluing from a bottle, but I dislike the quality of it. If requested I will make it in stainless, but the price would increase due to the material cost and extended machine time. I have slowly been researching the possibility of an aluminum version. Price would probably be close to the original version, depending on material prices.

This is a great idea! What about making one with a hole in the end so that the keyfob trick that you can pull with standard Makarovs becomes an option? Just a thought.

Makarov- wrote:This is a great idea! What about making one with a hole in the end so that the keyfob trick that you can pull with standard Makarovs becomes an option? Just a thought.

I'm not really sure what you're talking about. Do you have a picture?

Duo_Z wrote:

Makarov- wrote:This is a great idea! What about making one with a hole in the end so that the keyfob trick that you can pull with standard Makarovs becomes an option? Just a thought.

I'm not really sure what you're talking about. Do you have a picture?

The Makarov heel release has a hole in it that is sometimes used to pass a split-ring ("key ring") through. The ring is then grabbed as an enhanced release, similar to the way that the Okapi knife or Cold Steel's Kudu works.

I think Makarov.com used to have a pic.

Peace favor your sword,
Kirk

Photo at http://www.makarov.com


Don't know if your extended mag release would benefit from they keyring. I think the mag release on the Mak is stout but I don't recall. I just know some folks find it easier to have the keyring in there. The release on the P-64 seems relatively light as it is and this extension would make it easier to get to and have more leverage on. I suppose you "could" add a hole for someone that would want to add the keyring, but it really wouldn't be necessary.

Looks really good. Ever try to extend the mag catch. Would be nice to use a 8 round Makarov mag, but there might be other issues with the mag shapes

I dont think the split ring is needed/or desirable on a P64. The mags will drop free once the mag release is pressed, similar to a P38. On the Makarov they will not, unless the release is held back out of the way until the mag is free.

I agree with Stover on that point.

Adding a hole in there would not be very difficult at all. I personally don't think its really needed, but if you want one I can do it.

Looks really good. Ever try to extend the mag catch. Would be nice to use a 8 round Makarov mag, but there might be other issues with the mag shapes

I have not tried this, but if the Mak 8 round mag will fit and function in the P-64 I could give it a try.

I don't know if the mag from the Mak would even fit the '64. If it would, you would have to cut the little piece off on the follower that operates the slide hold open on the Makarov. So, you would be robbing Peter to pay Paul. You could possibly gain 2 more cartridges but ruin the mag so it wouldn't function in its intended pistol. Doesn't seem worth it unless one has a bunch of Mak mags and no Mak.

just got my 2 mag release, they look really good, great communications.
when I get time to install them I will post info

Got mine yesterday. Installed and works great. Excellent quality and workmanship. A little Oxpho-blue and it matches the gun nice.

Thanks Matt!