Slide wont go forward

Mods and Fixes by P-64 users...
Post Reply
mallman
Posts: 3
Joined: October 13th, 2011, 9:59 pm

Slide wont go forward

Post by mallman » October 14th, 2011, 9:08 pm

Hello everyone, new member

I just purchased a P-64 from SOG. When i pull the slide back it won't go forward (with an additional tug) unless the magazine is released and removed. I have completely cleaned the gun of cosmoline and oiled it pretty good. Same results. Magazine looks good with nothing apparent. Cant figure out what is causing the slide to stay in the open position. Works just fine without the mag.

mallman
Posts: 3
Joined: October 13th, 2011, 9:59 pm

Re: Slide wont go forward

Post by mallman » October 14th, 2011, 9:41 pm

Ok, im stupid. When the magazine is empty the slide stays in the open position. Duh! Just like its supposed to do. I just loaded the mag and cycled through an entire load smooth as can be. Then as the last round was ejected, the slide stayed back and open.

mallman
Posts: 3
Joined: October 13th, 2011, 9:59 pm

Re: Slide wont go forward

Post by mallman » October 14th, 2011, 9:41 pm

Ok, im stupid. When the magazine is empty the slide stays in the open position. Duh! Just like its supposed to do. I just loaded the mag and cycled through an entire load smooth as can be. Then as the last round was ejected, the slide stayed back and open.

User avatar
juniustaylor
Elite member
Elite member
Posts: 1408
Joined: February 9th, 2010, 10:56 pm
Location: KV, MO
Contact:

Re: Slide wont go forward

Post by juniustaylor » October 14th, 2011, 10:22 pm

Ha! :D Glad you got it figured out. Welcome!!!
US Air Force Veteran - OEF/OIF

Byrd
Member
Member
Posts: 94
Joined: August 26th, 2011, 4:08 pm
Location: Kansas

Re: Slide wont go forward

Post by Byrd » October 15th, 2011, 9:38 am

New gun, new learning curve! Welcome to the forum & the P-64!
From Above Only & Not Beneath!

Post Reply