p-64 firing pin
-
- Junior member
- Posts: 29
- Joined: April 5th, 2009, 5:28 pm
p-64 firing pin
Where can i get a firing pin for my p-64 ? ???
Never argue with an idiot, they pull you down their level and beat you with experence.
p-64 firing pin
Great question jeepman - I'd like to get a spare myself! I've searched online but no joy. I saw a Walther site, but doubt they're interchangeable.
Any of you experienced P-64 guys out there have any advice?
Any of you experienced P-64 guys out there have any advice?
Alcohol, Tobacco, and Firearms should be a convenience store, not a government agency
p-64 firing pin
Hey Guys,
I am checking with a Polish military friend to see if he can export a few P-64 firing pins and springs. I do not know if they would allow these parts into the US without an import license.
I know that we had problems bringing in German made Walther P-22 parts when they first came out. ::) Sgt P.
I am checking with a Polish military friend to see if he can export a few P-64 firing pins and springs. I do not know if they would allow these parts into the US without an import license.
I know that we had problems bringing in German made Walther P-22 parts when they first came out. ::) Sgt P.
p-64 firing pin
Thanks, Sgt P!
If/when you're able to get some firing pins from your friend, you'll have at least two buyers
If/when you're able to get some firing pins from your friend, you'll have at least two buyers
Alcohol, Tobacco, and Firearms should be a convenience store, not a government agency
p-64 firing pin
If you guys find where some are, post it, because I would like a couple myself.
-
- Junior member
- Posts: 29
- Joined: April 5th, 2009, 5:28 pm
p-64 firing pin
any body know where to get a firing pin for my p-64 ?
Never argue with an idiot, they pull you down their level and beat you with experence.
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
-
- Junior member
- Posts: 29
- Joined: April 5th, 2009, 5:28 pm
p-64 firing pin
still looking for a firing pin any help out there ?
Never argue with an idiot, they pull you down their level and beat you with experence.
p-64 firing pin
Guys,
Have been working the firing pin issue with my Polish Army friend. So far he has not replied back as I believe he got redeployed back over to Afghanistan. When I hear back from him, I will let you all know. Also have to BATF/Customs question about how many I could import here into the US without a license.
Sgt P.
Have been working the firing pin issue with my Polish Army friend. So far he has not replied back as I believe he got redeployed back over to Afghanistan. When I hear back from him, I will let you all know. Also have to BATF/Customs question about how many I could import here into the US without a license.
Sgt P.
-
- Senior member
- Posts: 401
- Joined: March 17th, 2009, 8:16 pm
p-64 firing pin
Know anyone with a programable lathe??
p-64 firing pin
I would love to get some titanium from Halprin Titanium up in MA and see if one of the local machine shops could copy my firing pin. Do not know the hardness of the P-64s firing pins but I am sure one of them could find out. Norm any idea?
Sgt P.
Sgt P.
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
p-64 firing pin
Sgt P
just go to ace hardware and get some stainless steel rod and turn that , I made a firing pin out of it for a snider carbine, and holding up just fine , I suspect the tips were burned off the firing pins from using wolf ammo, or weren't using snap cap's,
NORM
just go to ace hardware and get some stainless steel rod and turn that , I made a firing pin out of it for a snider carbine, and holding up just fine , I suspect the tips were burned off the firing pins from using wolf ammo, or weren't using snap cap's,
NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976
p-64 firing pin
Guys there is a good article entitled "Replacing Missing Firing Pins" written by a gunsmith at:
http://www.gunreports.com/special_reports/
It's not specific to the P-64 and is geared more to the person with some machinist skills but might be helpful. hangfire
http://www.gunreports.com/special_reports/
It's not specific to the P-64 and is geared more to the person with some machinist skills but might be helpful. hangfire
p-64 firing pin
Has anyone come up with the firing pin solution on where to buy?? on that note how good are the firings we have in our P-64's, thanks guys.
Ron
Ron
Ron Neisler, Emmett, Idaho
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
p-64 firing pin
Ron
they are good firing pins , the only problem that I have seen with them is when someone has fired wolf ammo in the gun , and burnt the tip off
NORM
they are good firing pins , the only problem that I have seen with them is when someone has fired wolf ammo in the gun , and burnt the tip off
NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976