Loose grips
-
- Posts: 1
- Joined: September 3rd, 2008, 8:24 pm
Loose grips
I have a 1969 P 64 in excellent condition except it has really loose grips. I figured a simple tighten job would fix, but to my surprize, The screw hole that holds the grips is stripped. Any ideas? Thanks.
Loose grips
soviet -
There is a small nut on the other side of the grips, easy to lose. It might be gone?
There is a small nut on the other side of the grips, easy to lose. It might be gone?
- papabear
- Global moderator
- Posts: 2080
- Joined: January 22nd, 2006, 1:16 am
- Location: Madisonville, Kentucky
Loose grips
If the nut is still there you might try using a thin rubber washer, I had to do that on a couple of my P-64's.
papabear
papabear
POINT SHOOTER
-
- Forum supporter
- Posts: 955
- Joined: March 23rd, 2006, 8:40 pm
- Location: delaware/Virginia eastern shor
Loose grips
1st check if there is a slot on one side of the nut . this faces out if nut is gone or stripped go to ace hardware they have a selection of the small metric nuts, if I remember it is 3mm. then follow Norms instructions on blueing if you want... but try Papapbears idea first.