When I bought my PA-63, I did the Wolff spring swap. I noticed some occasional jams and the slide stop kept falling out. Apparently when putting it back together, I somehow lost the slide stop spring. I think that is what is causing my occasional jamming issues with the PA-63.
I was wondering if I can use the one on the P-64 page that Norm makes. I compared the slide stop on my P-64 to the one on the PA-63 and it appears in the area where the spring sits, they look to be about the same. I thought about taking the spring out of the P-64 to see if it fits, but I don't like to take anything apart that I don't have to. I figure someone here knows for sure if the springs are same. Whaddya think?
PA-63 Slide Stop Spring
-
- Junior member
- Posts: 24
- Joined: September 10th, 2007, 4:46 pm
- Location: Southeast MO
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
PA-63 Slide Stop Spring
milsurpcop
yes they are pretty much the same spring
NORM
yes they are pretty much the same spring
NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976
-
- Junior member
- Posts: 24
- Joined: September 10th, 2007, 4:46 pm
- Location: Southeast MO
PA-63 Slide Stop Spring
THANK YOU NORM!!!
Just received the springs about 20 min ago. It took me about 2 min to set it in just right. Works absolutely perfect! Thanks again.
Just received the springs about 20 min ago. It took me about 2 min to set it in just right. Works absolutely perfect! Thanks again.
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
PA-63 Slide Stop Spring
milsurpcop
glade I could help
NORM
glade I could help
NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976