Wolff Springs are available ...

saands · Post by **saands** » March 8th, 2007, 11:54 am

On a whim I went to the new products page and there they are! Mine should ship tomorrow. I did get a calibration pack of the mainsprings ... mainly to be able to compare them to the PP springs so that we can have some data. I'll post how they compare when I get them.

Saands

Post by **normsutton** » March 8th, 2007, 1:30 pm

HERE IS THE LINK
http://www.gunsprings.com/SemiAuto/PolishNF.html

barnett3006 · Post by **barnett3006** » March 8th, 2007, 10:40 pm

Just put my order in!!!!!! Now Im gonna be driving home on my lunch breaks (on 2.50 a gallon) to check the mail.

nicksterdemus · Post by **nicksterdemus** » March 9th, 2007, 8:46 am

Saands you all over it brother. Let us know how far it chunks hulls w/"heavy" recoil n light mainspring. I started making a list a few weeks ago of all the springs I need so I can order in 1 felled swoop. Now I'm trying 2 justify the expense as it adds up.....

devlinfaust · Post by **devlinfaust** » March 9th, 2007, 9:30 am

I just ordered mine. It's great that Wolff kept their part of the bargain, and we should all support them for making the springs.

Post by **normsutton** » March 12th, 2007, 2:26 pm

just got my new wollf springs today 3 18# hammer springs and 2 20# recoil springs

fried 6 shots no mag drop and the recoil was a little lighter more of a strait back recoil very pleased with new springs might have to try the 22# recoil spring next

NORM

rlj102468 · Post by **rlj102468** » March 12th, 2007, 3:47 pm

Norm, What was the shipping? I want to get a 20# recoil, but don't want to pay double because of shipping. If you reorder let me know and I will split the shipping with you.
C-Ya, Bobby J.

Post by **normsutton** » March 12th, 2007, 3:51 pm

Bobby J.

S/H $4.95

I would wait I think saands order the 22# recoil spring and let him report on that one

NORM

saands · Post by **saands** » March 12th, 2007, 4:29 pm

I ordered the 22# ... I should be able to report on the stiffness of the mainsprings and on the stiffness of the recoil springs, but a firing test will have to wait until the weekend ... the work thing interferes with the testing thing

Saands

nbender · Post by **nbender** » March 12th, 2007, 9:33 pm

I look forward to your report saands! This has the potential for major reward.

b52stan · Post by **b52stan** » March 12th, 2007, 9:57 pm

Hey Norm, do you have a trigger pull gauge? I'd really be interested to see the SA and DA results with the 18#. Also your take on the 20# recoil spring. My gut says your combo should be just right, with the 90-95 grain stuff most are shooting now.

Stan

Post by **normsutton** » March 13th, 2007, 5:16 am

Stan

no I don't

with a two hand hold I can pull the trigger in DA and the site picture doesn't move with the 18# well maybe just a little when the hammer brakes free but not that bad ( bullets used were MFS 95grn. ) at 10' the strike of the bullet was 1"to 1 1/2 " below the bull with the 20# recoil spring
I did not change the firing pin spring
ejection of cases seem to be consistent and no smiles on cases

NORM

b52stan · Post by **b52stan** » March 13th, 2007, 10:11 am

Norm, any difference in recoil or case throw? I'm guessing that the recoil spring change won't affect the throw distance much.

Stan

Post by **normsutton** » March 13th, 2007, 10:45 am

Stan

the recoil seems less and more of a strait back,

not sure about cases they were hitting the ceiling and dropping 3" to the right

NORM

The Unofficial P64 Resource Forum