pics of new wood grips

Mods and Fixes by P-64 users...
himmel
Veteran member
Veteran member
Posts: 733
Joined: January 30th, 2006, 4:21 pm
Location: East Texas

pics of new wood grips

Post by himmel »

Oh man, that BR-61 looks good, if i say so myself!! Where do those come from? i gather the grip worked OK...
normsutton
Global moderator
Global moderator
Posts: 3575
Joined: February 26th, 2006, 6:59 am
Location: LAKELAND FL.

pics of new wood grips

Post by normsutton »

RB

I have 3 61's 2 are BR-61's and 1 is LR-61 the 2 BR-61 are 9x18 the LR-61 is a 22 long rifle

they were made by FEG they have steel frame's they are a little shorter than the P-64 in the grip i have 9# wolf spings in them for a PA-63

and i got them new in the box at SSME http://www.ssmedwi.com/

CB did them the way I would have done them I still have to some ajustments to them but still they fit right out of the box

PLEASE THANK CB FOR ME THEY ARE GREAT

NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976

ImageImage
himmel
Veteran member
Veteran member
Posts: 733
Joined: January 30th, 2006, 4:21 pm
Location: East Texas

pics of new wood grips

Post by himmel »

OK, he'll be glad to hear it...
normsutton
Global moderator
Global moderator
Posts: 3575
Joined: February 26th, 2006, 6:59 am
Location: LAKELAND FL.

pics of new wood grips

Post by normsutton »

New wood grip owner's you might want to pick up some these


http://www.brownells.com/aspx/NS/store/ ... 388&s=1752

you can get a descount if you have a busness

NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976

ImageImage
space
Forum supporter
Forum supporter
Posts: 236
Joined: February 25th, 2006, 4:37 pm
Location: NH

pics of new wood grips

Post by space »

Pretty sweet. Thanks for the post.

They have a counter-sink bit for them as well.
hawkerjim
Junior member
Posts: 20
Joined: April 8th, 2006, 3:21 pm

pics of new wood grips

Post by hawkerjim »

Wood finish--Odd-ball idea No. 3,40.....

I have recently been on a Vicks Vaporub kick. It's great for warding off black flies and mosquitos. And....as a wooden grip/stock finish. Suggestion is to apply liberally or conservatively and warm with a hair dryer to liquify. Polish with cotton diaper; Wolf Wiping Cloth, Detroit. $50 for a ton.

Hawkerjim
novgarod
Member
Member
Posts: 72
Joined: November 11th, 2005, 9:11 pm
Location: Durham, NC

pics of new wood grips

Post by novgarod »

Hey, Hawker, I tried Preparation H once - I liked the color and it helped shrink the pores in the wood . . . ;D ;D
Last edited by novgarod on May 23rd, 2006, 6:11 pm, edited 1 time in total.
abwehr
Veteran member
Veteran member
Posts: 888
Joined: November 8th, 2005, 11:31 am
Location: Upstate SC

pics of new wood grips

Post by abwehr »

Hey, my wife put some around here eyes one time, and "son-of-a-gun" the stuff did work to shrink the little lines! I asked her how she got the "ends" wrong where the Preparation H was supposed to go and how she told the difference. She chased me all over the house with that one, LMAORF
Last edited by abwehr on May 24th, 2006, 11:02 am, edited 1 time in total.
xelloss
Member
Member
Posts: 105
Joined: December 2nd, 2005, 9:30 pm
Location: Indiana

pics of new wood grips

Post by xelloss »

Got my purpleheart P-64 grips from Christian Bond today... They are AWESOME!!! Can't wait to take it out to the range and give it a run without the annoying ridge!!! Thanks for the great grips, Himmel and Himmel Jr.!!! (Can't post pics right now, due to my computer not liking my digital camera at the moment... Will try to post some as soon as I get it working again...)

-Mark
truth

pics of new wood grips

Post by truth »

GOT MY BOND GRIPS TODAY 2 P-64 AND 1 BR-61 HOPE I DO THIS RIGHT


Image

THANK YOU

NORM

Does the grip on the bottom of this picture not fit the frame or is this my imagination? I see a sixteenth gap from frame to grip, top and side. I just sent a money order out today for grips, makes me nervous. I think it is a 1969 piece?
normsutton
Global moderator
Global moderator
Posts: 3575
Joined: February 26th, 2006, 6:59 am
Location: LAKELAND FL.

pics of new wood grips

Post by normsutton »

CB WILL REMAKE GRIPS IF THEY DON'T FIT RIGHT AT NO CHARGE

THERE IS SOME WOOD THAT YOU MAY OR MAY NOT HAVE TO TAKE OFF ON THE UNDERSIDE OF BACK STRAP SO YOU CAN COCK THE HAMMER , THESE HAPPEN TO BE PIX OF OLD GRIPS
AND THE PIX ARE NOT THAT GOOD.

CB DOSE NICE WORK AND STANDS BEHIND HIS WORK

NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976

ImageImage
normsutton
Global moderator
Global moderator
Posts: 3575
Joined: February 26th, 2006, 6:59 am
Location: LAKELAND FL.

pics of new wood grips

Post by normsutton »

NEW PIX

RB
Got my my new BOND GRIPS today the new ones are on the bottom of pix. the old ones are on top CB dose nice work ,

Image


Image




A BIG THANK YOU

NORM
Last edited by normsutton on July 29th, 2006, 8:06 pm, edited 1 time in total.
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976

ImageImage
truth

pics of new wood grips

Post by truth »

Thanks for the reassurance and the tip about the backstrap. The escutcheon screws you recomended in earlier post, can they be countersunk in existing holes that he puts in the grips or did you fill them and resink new holes, or order them without holes and do it yourself?
normsutton
Global moderator
Global moderator
Posts: 3575
Joined: February 26th, 2006, 6:59 am
Location: LAKELAND FL.

pics of new wood grips

Post by normsutton »

TRUTH
I let him drill holes. I all so ordered the counter sink bit with the escutcheon and screws
makes it much easier , you have to drill out the hole in the frame one drill bit bigger too, so you can get screw in you can almost twist the drill bit by hand or vise grips but a hand drill is better at slow speed.

I have also used the escutcheon's with zee grips too

I think I have some pix of them too on this forum

NORM
Last edited by normsutton on July 29th, 2006, 10:09 pm, edited 1 time in total.
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976

ImageImage
himmel
Veteran member
Veteran member
Posts: 733
Joined: January 30th, 2006, 4:21 pm
Location: East Texas

pics of new wood grips

Post by himmel »

Hi guys--Thanks for the good words Norm...and the pics! I told Christian about the backstrap thing--he is a little confused, he always fits the grips on my P64 and makes sure they don't interfere with the action, either single or double, before he sends them out. What exactly is the problem? Is it a matter of each pistol being a little different maybe? Like Norm said, he will make any problem right, but it would be better to eliminate any defect in the first instance...Thanks again--
Post Reply