Mosin nagant question

Talk about rifles and shotguns here.
Post Reply
gilmaxter
Member
Member
Posts: 58
Joined: June 23rd, 2015, 1:40 pm

Mosin nagant question

Post by gilmaxter »

Now I like my mosin nagant ex Dragoon. But I am not diging the sights on it. I would much prefer to use the dragoon sights over the 91/30 sights. Now I cant find any dragoon sights and bands but I did find some better sights from ebay. But I dont know if it will work reason why I am here to ask the experts if this will work here is the link

http://m.ebay.com/itm/Finnish-M39-Mosin ... nav=SEARCH

Will this fit a Russian ex - dragoon ?
tech 1
Member
Member
Posts: 57
Joined: December 9th, 2012, 7:09 pm

Re: Mosin nagant question

Post by tech 1 »

User avatar
Curly1
Elite member
Elite member
Posts: 2529
Joined: September 20th, 2011, 11:35 pm
Location: Upstate NY

Re: Mosin nagant question

Post by Curly1 »

There are Finish blade sights here.

https://www.libertytreecollectors.com/p ... ategory=17
Laugh Hard and Often.

Gary
gilmaxter
Member
Member
Posts: 58
Joined: June 23rd, 2015, 1:40 pm

Re: Mosin nagant question

Post by gilmaxter »

Well curly1 thank you for that list. Question this product

https://www.libertytreecollectors.com/p ... ategory=17

Would this fit in a 91/30 sight ? And just replace the blade sit of the 91/30 without replacing the base.
User avatar
Curly1
Elite member
Elite member
Posts: 2529
Joined: September 20th, 2011, 11:35 pm
Location: Upstate NY

Re: Mosin nagant question

Post by Curly1 »

Not sure of that. You can ask over on the Mosin site on Gunboards.

They will be able to tell you anything you need to know.

http://forums.gunboards.com/forumdispla ... -Nagant-HQ
Laugh Hard and Often.

Gary
Ketchman
Elite member
Elite member
Posts: 1144
Joined: December 24th, 2011, 4:36 pm
Location: Wyoming, USA

Re: Mosin nagant question

Post by Ketchman »

I do not believe that the Finnish M-39 sight will fit in the existing Moisin Nagant sight base as the barrels are different. The Finnish rifles used their own manufacture barrels and stocks on the existing Moisin receiver, so my bet would be no fit. BUT, that being said I am NOT an expert on this so I would do more checking. But I had to throw my 2 pennies in.
Close enough for Government work will get you dead, ask any Vet.
Post Reply