post some your pet 9 X 18 loads

Discussion on reloading the 9x18 and any other cartridge
normsutton
Global moderator
Global moderator
Posts: 3575
Joined: February 26th, 2006, 6:59 am
Location: LAKELAND FL.

post some your pet 9 X 18 loads

Post by normsutton »

pet 9 X 18 loads read first

Use these loads with caution and at your own risk. The management of this web site are not responsible for any outcome of using the loads posted.
If we feel the load is unsafe, it will be deleted without notice.

To post here, you must include all of the information needed for others to make the load.

Please use this format:


1. Bullet description
3. Case used
3. Type and amount of powder
4. Primer
5. gun used
6. Special notes


Please do not discuses data on this post, post discussion in a new thread ,this is to post pet loads only
Last edited by normsutton on March 5th, 2010, 7:20 am, edited 1 time in total.
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976

ImageImage
normsutton
Global moderator
Global moderator
Posts: 3575
Joined: February 26th, 2006, 6:59 am
Location: LAKELAND FL.

post some your pet 9 X 18 loads

Post by normsutton »

1. Bullet description = 100 grn lead sized to 363
2, Case used = 9 MM cut down brass
3. Type and amount of powder = 4 grn W 231
4. Primer = small Winchester
5. gun used = PA-63
6. Special notes = medium load, used for target and defense


NORM
Last edited by normsutton on March 4th, 2010, 8:26 am, edited 1 time in total.
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976

ImageImage
anjdrifter
Forum supporter
Forum supporter
Posts: 955
Joined: March 23rd, 2006, 8:40 pm
Location: delaware/Virginia eastern shor

post some your pet 9 X 18 loads

Post by anjdrifter »

Norm this is a great load I have been using it since you shared it with me .It was the first attempt at reloading and still the one I reload the most. absolutley no problems with it.
robalan
Member
Member
Posts: 147
Joined: February 24th, 2010, 9:56 pm
Location: PA

post some your pet 9 X 18 loads

Post by robalan »

I think this Subject should have some very good information in it. My guess is some of these pet loads may have roots from some good reload manuals. If anyone can list a source book title that would be great. I realized most of these may be from your own experiments of course and there would not really be a publication involved.

Thanks for all this great stuff!!
k31swiss
Posts: 8
Joined: September 14th, 2008, 8:44 am

Re: post some your pet 9 X 18 loads

Post by k31swiss »

1. Bullet description = Lead RN, Lee 365-95-1R, comes out about 100 gr with WW
3. Case used = 9mm cut down and 9x18 factory brass
3. Type and amount of powder = Solo1000, 3.0 gr
4. Primer = Wolf
5. gun used = P-64 and CZ-83
6. Special notes: Medium load. powder is very clean. My standard load, have shot thousands. Have used both 50/50 lube and Dare lube.
Gik-tal
Posts: 5
Joined: March 19th, 2010, 11:02 pm

Re: post some your pet 9 X 18 loads

Post by Gik-tal »

Bullet Description: Berry 95 Grain Plated round nose & Hornady 95 grain XTP JHP.
Case: Military WCC 9mm cut down to length and MFS cases
Type and Ammount of powder: 7.0 grains of Accurate Arms #7
Primer: Winchester Small Pistol
Gun Used: IJ-70; FEG R61 & P64
Notes: out of IJ-70 bave a veloicty of 1060 fps. shot clean and accurate out of all three guns,
gunneyrabbit
Forum supporter
Forum supporter
Posts: 1221
Joined: February 5th, 2007, 8:52 pm
Location: Portland Oregon

Re: post some your pet 9 X 18 loads

Post by gunneyrabbit »

Bullets are 95 gr. Bear Creek Moly coated LRN.
Cases are various 9mm Parabelums cut down to 9x18 mm.
Powder is 3.6 gr. Accurate #2
Primers are either Wolf or Winchester small primers.
This load is very accurate out of all of my 9x18 pistoles.
The information came from the Accurate Arms web page in the loading data section.

A quick note about the Wolf primers, I find they are 100% reliable out of semi-auto pistoles with exposed hammers and revolvers . I have found that when I've used them in double action, concealed hammer, semi-auto pistoles they may or may not ignite the round. Your experience may vary, this has been mine, I still use them regularly but I'm specific about what they go into.
G.R.
saands
Senior member
Senior member
Posts: 263
Joined: November 17th, 2005, 12:09 pm

Re: post some your pet 9 X 18 loads

Post by saands »

When I first started loading for the 9x18 I couldn't find any load data at all! I did, however, have the QuickLoad software to model the interior ballistics and I set out to develop loads with that as a guide.

THE FOLLOWING LOAD IS VERY LIKELY A MAX LOAD AND ANYONE THAT ATTEMPTS TO USE IT SHOULD, AS ALWAYS, REDUCE THE CHARGE BY 10% AND WORK IT UP SLOWLY IN THEIR OWN FIREARM... EVERY P64 AND MAK IS A DIFFERENT SYSTEM AND WHAT WORKS IN ONE MAY NOT WORK IN ALL.

New Starline Brass Case
Hornady 95gr XTP-HP
CCI Small Pistol Primers
VihtaVuori N-350 Powder 6.0 grains (individually weighed, not thrown)
Overall length: 0.970"

This load chronies at 1,115fps out of a 1969 and a 1973 P64 (both with 22# recoil springs and 18# hammer springs). According to QuickLoad, this level of performance should carry a Max Pressure of 23,150 psi and the CIP limit for the 9x18 is 23,206 ... so as I mentioned before, it SHOULD BE TREATED AS A MAX LOAD ...

With the premium components involved, I don't shoot these loads constantly, but I have shot enough of them to feel comfortable with their performance.

Saands
gunneyrabbit
Forum supporter
Forum supporter
Posts: 1221
Joined: February 5th, 2007, 8:52 pm
Location: Portland Oregon

Re: post some your pet 9 X 18 loads

Post by gunneyrabbit »

NORM and the rest of you fellows who convert your 9x19 cases to 9x18 cases. The Johnson Creek Gun Club is a small range, no more than ten or twelve lanes with screens for barriers every second lane. There is a constant problem of folks picking up each others 9x19 cases and my cut down 9x18's were getting lost in the process. Last week I took the bull by the horns and light fingered a bottle of my wife's fancy glittery candy apple red nail polish, I'm sure she will understand, and I painted the primed cartridge bases with it. Guess what, I got every case back and some pretty strange looks toboot!
The strange looks I can deal with, I got my casings back and that's all I cared about. Hope this helps some of you fellow shooters.
G.R.
Last edited by gunneyrabbit on May 14th, 2010, 12:02 am, edited 1 time in total.
k31swiss
Posts: 8
Joined: September 14th, 2008, 8:44 am

Re: post some your pet 9 X 18 loads

Post by k31swiss »

I too mark my cut down cases. I use Britchwood Casey's Brass Black. I paint it on the head stamp and in a few seconds it turns black. Not as glittery as candy apple red nail polish but a little more durable. ( And more manly :-O )

Also, get yourself a brass catcher. They work great with the P-64. Catches about 95% and the rest just drop to your feet.

http://www.gracomodels.com/catcher.html
daven
Member
Member
Posts: 75
Joined: April 4th, 2009, 3:50 pm

Re: post some your pet 9 X 18 loads

Post by daven »

I simply purchased a 1000 cases from Starline in 9 x 18 a few years ago. Saves an awful lot of trouble in cutting down cases and by now I have amortized my purchases to almost zero. Never had a problem with Starline and I load just about every handgun calibre from 0.25ACP to 0.455 Webley, including a nonexistant 0.41 Special that has the correct head stamp from a run that Starline made of ~100K cases to special order a few years ago,
big54r
Member
Member
Posts: 104
Joined: November 29th, 2008, 3:07 am
Location: Metro Houston

Re: post some your pet 9 X 18 loads

Post by big54r »

hey fella's I was wondering if any of you are reloading some +p 9x18 ?
When I start reloading again I wanna try work some up to use in a cz82.
normsutton
Global moderator
Global moderator
Posts: 3575
Joined: February 26th, 2006, 6:59 am
Location: LAKELAND FL.

Re: post some your pet 9 X 18 loads

Post by normsutton »

big54r

I don't load any thing hot any more, I feel like its a waste of powder , and sure isn't any good for the brass

NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976

ImageImage
ramiriz60
Junior member
Posts: 17
Joined: July 3rd, 2010, 12:09 pm

Re: post some your pet 9 X 18 loads

Post by ramiriz60 »

Gun. PM makarov IJ-70 9x18 mak

Cases. Cut down military 9mm luger to 9x18 specs,
Bullet Rim Rock standard, cast 116 gr. FN Bullet
Bullet Diameter .365"
Primer Magtech SP
Powder Unique
Start 3.5 gr. to 3.8 gr MAX Work up slowly O.A.L. .965" with bullet do not load shorter, if you do lower powder charges & work up slowly
comments: 3.5 gr. medium recoil 3.8 gr Heavier recoil, do not load heavier without cronograph. no pressure signs !
Last edited by normsutton on July 14th, 2010, 7:41 am, edited 1 time in total.
Reason: don't think this a good load for a P-64
ramiriz60
Junior member
Posts: 17
Joined: July 3rd, 2010, 12:09 pm

Re: post some your pet 9 X 18 loads

Post by ramiriz60 »

cases cut down military 9mm luger to 9x18 specs. Pm makarov pistol 9x18 mak .365" groove
bullet. Lee cast RN Weight with #2 alloy 106 gr.
bullet diameter as cast at .3655"
bullet lube LLA and after drying overnight dust with powdered mica
primer magtech SP
powder AA#2 Start at 3.5 gr. to 4.0 gr. MAX work up slowly !!!
O.A.L. .965 with bullet
comments. no pressure signs and bore clean & shiney no leading clean burning load
SLOWLY and be careful ! Ron

this is a safer load
NORM
Last edited by normsutton on July 14th, 2010, 7:44 am, edited 1 time in total.
Post Reply