trigger bar binding with polish iron grips

Info, pictures, advice...
usagi
Junior member
Posts: 10
Joined: April 18th, 2018, 4:08 am

Re: trigger bar binding with polish iron grips

Post by usagi » June 9th, 2018, 2:16 am

nope, never got a response.

Granpooba
Member
Member
Posts: 84
Joined: January 30th, 2018, 1:05 am
Location: Queensbury / Lake George, NY

Re: trigger bar binding with polish iron grips

Post by Granpooba » June 9th, 2018, 8:22 am

usagi wrote:
June 9th, 2018, 2:16 am
nope, never got a response.
Squeaky wheel gets the grease :!: :wink:

usagi
Junior member
Posts: 10
Joined: April 18th, 2018, 4:08 am

Re: trigger bar binding with polish iron grips

Post by usagi » June 25th, 2018, 10:42 pm

tried again, still no response.

jonsteckelberg
Posts: 3
Joined: August 9th, 2017, 2:00 pm

Re: trigger bar binding with polish iron grips

Post by jonsteckelberg » July 29th, 2018, 9:03 pm

I have the same issue and have discussed it with Russ. It looks like a big factor is how you grip the gun. Some people have no problems while others do. I like the grip but am unwilling to adjust my grip just for this gun. My solution is a Hogue Handall Beaver tail grip sleeve. The one for the M&P shield 45 fits perfect.

User avatar
Curly1
Elite member
Elite member
Posts: 2342
Joined: September 20th, 2011, 11:35 pm
Location: Upstate NY

Re: trigger bar binding with polish iron grips

Post by Curly1 » July 30th, 2018, 3:06 pm

Yes that is concerning who knows if you will grip it correctly in a stress situation.
Laugh Hard and Often.

Gary

W.Brown
Posts: 3
Joined: January 6th, 2013, 11:30 am

Re: trigger bar binding with polish iron grips

Post by W.Brown » July 30th, 2018, 9:16 pm

I ended up going back to my stock grips due to the Polish Iron Grips not working a few years back.
My P64 malfunctioned and I removed them after many attempts to make them work, I could not risk a malfunction.
I will trade the Polish Iron Grips for a stock set of grips.
These guns work just fine with stock grips.

usagi
Junior member
Posts: 10
Joined: April 18th, 2018, 4:08 am

Re: trigger bar binding with polish iron grips

Post by usagi » August 2nd, 2018, 2:55 am

jonsteckelberg wrote:
July 29th, 2018, 9:03 pm
I have the same issue and have discussed it with Russ. It looks like a big factor is how you grip the gun. Some people have no problems while others do. I like the grip but am unwilling to adjust my grip just for this gun. My solution is a Hogue Handall Beaver tail grip sleeve. The one for the M&P shield 45 fits perfect.
how does that even fit? you would have to take the stock grips off, which means the trigger bar is exposed and not protected anymore.

User avatar
Curly1
Elite member
Elite member
Posts: 2342
Joined: September 20th, 2011, 11:35 pm
Location: Upstate NY

Re: trigger bar binding with polish iron grips

Post by Curly1 » August 2nd, 2018, 12:43 pm

I would think he put the Houge over the stock grips.
Laugh Hard and Often.

Gary

usagi
Junior member
Posts: 10
Joined: April 18th, 2018, 4:08 am

Re: trigger bar binding with polish iron grips

Post by usagi » August 2nd, 2018, 2:08 pm

Curly1 wrote:
August 2nd, 2018, 12:43 pm
I would think he put the Houge over the stock grips.
nope, doesn't fit. I can 100% confirm that these grips do not fit over the stock grips.

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests