Page 1 of 1

What spare parts are good to have?

Posted: October 5th, 2016, 8:32 pm
by Templar
Not sure if this is the right place to post but I would like to make a first aid kit for my p-64 what parts should I try to buy

Re: What spare parts are good to have?

Posted: October 6th, 2016, 12:22 am
by Curly1
Welcome to the forum.

IMO one of the parts that would be good to have but is hard to find is the decocker/safety lever.

Next would be the trigger guard.

Re: What spare parts are good to have?

Posted: October 6th, 2016, 5:09 pm
by robhic
The de-cocker is a GREAT idea - but kinda like unicorn milk! I'd say about the hardest part to find so hope you never need one. I would add (because these are some of what I have) are 1-2 springs to operate the slide lock-lever. Not hard to find along with a new trigger spring because member NORM SUTTON makes 'em. Spares are good because they're inexpensive and tend to get lost if they "launch" on you during disassembly. Detent spring and detent for same reason (cheap and good to have on hand for convenience) if you remove the decocker and get another "launch". Some different weight Wollf springs just to have in case you want to play with that ... but that's just me.

Re: What spare parts are good to have?

Posted: October 7th, 2016, 4:58 am
by adrank888
thank you




Gclub

Re: What spare parts are good to have?

Posted: October 7th, 2016, 11:00 am
by Weasel640
Pretty much look at this parts list: http://p64resource.com/board/P64_Parts_List.pdf

Any one of those little springs and/or detents that you could loose flying across the room. Also the firing pin is good to have extra of, as well as the disconnector. Also if you think you might want to bob the hammer, get a replacement hammer before you do it.

Re: What spare parts are good to have?

Posted: October 7th, 2016, 3:38 pm
by chestertnted
Springs and firing pin for sure

Re: What spare parts are good to have?

Posted: October 16th, 2016, 1:37 pm
by chestertnted
I am leaning towards a New York reload scenario.
Just have 2, or 3 spare P-64's.
They are cheap enough

Re: What spare parts are good to have?

Posted: November 19th, 2016, 10:48 pm
by Coldsteel
chestertnted wrote:I am leaning towards a New York reload scenario.
Just have 2, or 3 spare P-64's.
They are cheap enough
+ 1 on New York Reloads.They wereally on sale at Cabell in vg condition with 2 mags for $249!

Re: What spare parts are good to have?

Posted: November 19th, 2016, 10:50 pm
by chestertnted
Great concealed carry. Slim, trim, and slick!

TED