Trigger not wanting to engage
-
- Junior member
- Posts: 16
- Joined: September 10th, 2015, 5:33 pm
- Location: Cheyenne, WY
Trigger not wanting to engage
Hello, new here and in trouble. I know zero about p64's, and picked up my first today, bought from "Classic Firearms". Didn't check it out at dealers because I have had good luck with this supplier before.
Got it home and unpacked it. Noticed right away the trigger didn't look right. I knew how to field strip the gun and did so. I THINK the trigger bar will not stay in the right position. I can shoot it one shot at a time, but have to turn gun upside down to reset the trigger bar before it will engage again.
I think the fix should be simple, but so am I. Can you help and old man out here? Any help would be greatly appreciated.
Dale
Got it home and unpacked it. Noticed right away the trigger didn't look right. I knew how to field strip the gun and did so. I THINK the trigger bar will not stay in the right position. I can shoot it one shot at a time, but have to turn gun upside down to reset the trigger bar before it will engage again.
I think the fix should be simple, but so am I. Can you help and old man out here? Any help would be greatly appreciated.
Dale
Re: Trigger not wanting to engage
That is the Trigger Return Spring sold here:
http://www.p64resource.com/goods.php
You should also contact Classic and get a refund for your troubles.
http://www.p64resource.com/goods.php
You should also contact Classic and get a refund for your troubles.
Weasel
When you vote, you are exercising political authority, you're using force. And force my friends is violence.
When you vote, you are exercising political authority, you're using force. And force my friends is violence.
-
- Junior member
- Posts: 16
- Joined: September 10th, 2015, 5:33 pm
- Location: Cheyenne, WY
Re: Trigger not wanting to engage
Weasel thank you for your reply, in the pictures it shows a slide stop spring, the slide stop works just fine. Is it necessary to change both springs to get the trigger spring to work correctly?
Is there a video some where showing how to replace the trigger spring?
Thanks,
Dale
Is there a video some where showing how to replace the trigger spring?
Thanks,
Dale
Re: Trigger not wanting to engage
No, you dont need to replace the slide stop spring if its working properly. The forllowing pics on that thread posted by Weasel shows how to replace the spring.
You can also check here for the video made by another member; viewtopic.php?f=1&t=4200
You can also check here for the video made by another member; viewtopic.php?f=1&t=4200
Re: Trigger not wanting to engage
Can't make a return to Classic Firearms once you accept it from the FFL. Or, if you ordered with a c&r, can't return it period.
Re: Trigger not wanting to engage
I had the same problem when I pressed the trigger when the gun was disassembled and the spring flew out. Just follow the videos and you should be ok.
-
- Junior member
- Posts: 16
- Joined: September 10th, 2015, 5:33 pm
- Location: Cheyenne, WY
Re: Trigger not wanting to engage
Thanks to all who replied, I will try to do the job myself, I am going to order some new Wolff springs for it. Might as well tune the old gal up right when I dig into her.
Any recommendations for best recoil spring?
Dale
Any recommendations for best recoil spring?
Dale
Re: Trigger not wanting to engage
That is because Norm sells both. If you scroll further down on the same page it shows the Trigger Spring, and how to install it.cheyenne08 wrote:Weasel thank you for your reply, in the pictures it shows a slide stop spring, the slide stop works just fine. Is it necessary to change both springs to get the trigger spring to work correctly?
Is there a video some where showing how to replace the trigger spring?
Thanks,
Dale
I like the Recoil Spring at 22 pounds with the Hammer Spring at 18 pounds.cheyenne08 wrote:Thanks to all who replied, I will try to do the job myself, I am going to order some new Wolff springs for it. Might as well tune the old gal up right when I dig into her.
Any recommendations for best recoil spring?
Dale
Weasel
When you vote, you are exercising political authority, you're using force. And force my friends is violence.
When you vote, you are exercising political authority, you're using force. And force my friends is violence.
Re: Trigger not wanting to engage
PLUS .... Norm thoughtfully includes copies of an installation instruction w/pictures when you order a new spring. It's a bit tight, but can be done if the pictures/instructions are followed. GOOD LUCK!!!Weasel640 wrote:That is because Norm sells both. If you scroll further down on the same page it shows the Trigger Spring, and how to install it.
- Robert
"Giving Money and Power to Government is Like Giving Whiskey and Car Keys to Teenage Boys" - PJ O'Rourke
"Giving Money and Power to Government is Like Giving Whiskey and Car Keys to Teenage Boys" - PJ O'Rourke
-
- Junior member
- Posts: 16
- Joined: September 10th, 2015, 5:33 pm
- Location: Cheyenne, WY
Re: Trigger not wanting to engage
Well guys, I wimped out. I ordered another p64 today from AIM surplus. My reasoning is that I am terrible mechanically, but also wanted to get another P64 anyway, and I have no idea how long the prices are going to remain low.
I will never order from Classic Firearms again, sending a defective firearm AFTER accepting my $20.00 for "hand picking" is not acceptable, plus they have failed to reply to my email.
I ordered Wolff springs today, and may in the future get a trigger return spring from Norm, and see if I can get the job done on the one I have now. Push come to shove, I will have one for parts.
Thanks to all who attempted to help me, it is greatly appreciated.
Dale
I will never order from Classic Firearms again, sending a defective firearm AFTER accepting my $20.00 for "hand picking" is not acceptable, plus they have failed to reply to my email.
I ordered Wolff springs today, and may in the future get a trigger return spring from Norm, and see if I can get the job done on the one I have now. Push come to shove, I will have one for parts.
Thanks to all who attempted to help me, it is greatly appreciated.
Dale
Re: Trigger not wanting to engage
Just a thought: Could the disconnector be hanging up? Part #2 on the exploded diagram? Maybe clean it up, make sure it's not hitting the frame or slide, light lube, re-assemble? Turning it upside down to work makes me wonder if that might not have something to do with it. You asked for simple!cheyenne08 wrote: I knew how to field strip the gun and did so. I THINK the trigger bar will not stay in the right position. I can shoot it one shot at a time, but have to turn gun upside down to reset the trigger bar before it will engage again
- Robert
"Giving Money and Power to Government is Like Giving Whiskey and Car Keys to Teenage Boys" - PJ O'Rourke
"Giving Money and Power to Government is Like Giving Whiskey and Car Keys to Teenage Boys" - PJ O'Rourke
- chestertnted
- Senior member
- Posts: 310
- Joined: July 13th, 2015, 8:53 pm
Re: Trigger not wanting to engage
For sure let us know if you attempt to fix the first P-64. I use the heaviest recoil spring Wolffe offers.
"For the Founders, the right of the citizen to be armed-they never imagined a world in which they would be disarmed for the supposed benefit of preventing access to weapons by madmen."
Re: Trigger not wanting to engage
Just curious - why?chestertnted wrote:I use the heaviest recoil spring Wolffe offers.
- Robert
"Giving Money and Power to Government is Like Giving Whiskey and Car Keys to Teenage Boys" - PJ O'Rourke
"Giving Money and Power to Government is Like Giving Whiskey and Car Keys to Teenage Boys" - PJ O'Rourke
Re: Trigger not wanting to engage
robhic wrote:Just curious - why?chestertnted wrote:I use the heaviest recoil spring Wolffe offers.
Probably personal preference. The 22 pound Recoil Spring is the heaviest they offer. The same that I use. It works well. Although others don't seem to notice it some of us feel that it does help the stiff/snappy recoil.
Weasel
When you vote, you are exercising political authority, you're using force. And force my friends is violence.
When you vote, you are exercising political authority, you're using force. And force my friends is violence.