SAFETY

Info, pictures, advice...
Post Reply
todd4301
Posts: 1
Joined: February 27th, 2015, 5:38 pm

SAFETY

Post by todd4301 » February 27th, 2015, 6:12 pm

Hey I recently got a p64,and the safety on it is hard turning on and off is it possible something is out of alignment causing it to be so stiff on and off

User avatar
Curly1
Elite member
Elite member
Posts: 2467
Joined: September 20th, 2011, 11:35 pm
Location: Upstate NY

Re: SAFETY

Post by Curly1 » February 27th, 2015, 6:43 pm

Welcome to the forum Todd.

Do a search on this problem it has been discussed in a few threads here on how to smooth it out..
Laugh Hard and Often.

Gary

User avatar
craig
Junior member
Posts: 44
Joined: September 19th, 2014, 12:44 pm

Re: SAFETY

Post by craig » February 27th, 2015, 8:39 pm

Same problem I had with mine. Try this first before doing anything radical: Clean the assembly with Gun Scrubber or similar product, apply several drops of Lucas Assembly Lube, then work the safety back and forth (it may take 100 or more rotations). I hope it works for your gun like it did on mine and several other members of the group.
There is no free lunch

Post Reply