ball or jhp
ball or jhp
love the p64. will make a great summer/light day cary. would like to use jhp ammo but not sure if thats the best choise for the 3.5inch bbl. whats yall's take on it. allso where would you rank the Hornady jhp/xtp against other jhp
Re: ball or jhp
I prefer ball ammo because the p64 was designed for it; also you get deeper penetration with ball ammo.
Re: ball or jhp
It depends on what feeds well. My P-64 doesn't feed Hornaday (won't even chamber). I use Pow'r Ball or FMJ. A good FMJ like S&B, Winchester or Fio. will definitely get the job done. I think you should experiment and see what will actually feed reliably.
Re: ball or jhp
I've been carrying FMJ but think I'm going to go with the SilverBear JHP's. I tested some in wetpack and it seems to out-penetrate the hornady xtp's and is much cheaper and more easily available.
Check out a couple videos I made here
http://www.youtube.com/watch?v=5LY5IFZib9g
http://www.youtube.com/watch?v=zcmwy3a9wfI
Check out a couple videos I made here
http://www.youtube.com/watch?v=5LY5IFZib9g
http://www.youtube.com/watch?v=zcmwy3a9wfI
-
- Posts: 5
- Joined: July 11th, 2010, 8:47 pm
Re: ball or jhp
Do you P64 owners think this stuff will be ok to fire in a P64?-
http://www.buffalobore.com/index.php?l= ... tail&p=220
http://www.buffalobore.com/index.php?l= ... tail&p=220
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
Re: ball or jhp
Kalashnikov Josh
IMO
its too much for a P-64 and FEG guns ,it shows only the
1014 fps -- East German Makarov, 4 inch barrel
1057 fps -- CZ 82, 4 inch barrel
but its you gun,
NORM
IMO
its too much for a P-64 and FEG guns ,it shows only the
1014 fps -- East German Makarov, 4 inch barrel
1057 fps -- CZ 82, 4 inch barrel
but its you gun,
NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976
Re: ball or jhp
I think that since there aren't any spare I would agree with Norm that it might be risky. The P-64 is small it would at least be pretty hard on your hand and no doubt shorten the life of your gun.
-
- Posts: 5
- Joined: July 11th, 2010, 8:47 pm
Re: ball or jhp
Norm seems to know what hes talking about-I'll keep the 'heavy' stuff for the CZ82.......
- papabear
- Global moderator
- Posts: 2080
- Joined: January 22nd, 2006, 1:16 am
- Location: Madisonville, Kentucky
Re: ball or jhp
Good Idea.....
-
- Junior member
- Posts: 37
- Joined: July 12th, 2010, 7:44 pm
- Location: Republic of Texas
Re: ball or jhp
I just ordered a p64 from SOG so I too was wondering which you guys would recommend. As was mentioned, I'll probably play around with some different brands to see what mine likes.
Joe
I'd say 90% are saying, We all know it's fake; we're playing along. The other 10% are saying, We're ready! And I'd say 10% of that 10% can't wait for it to happen.
Max Brooks on Zombies to CNN
I'd say 90% are saying, We all know it's fake; we're playing along. The other 10% are saying, We're ready! And I'd say 10% of that 10% can't wait for it to happen.
Max Brooks on Zombies to CNN
-
- Member
- Posts: 121
- Joined: December 7th, 2008, 11:53 pm
- Location: Central Texas
Re: ball or jhp
I've settled on ball for my P-64s. I do use Hornady in my Maks and Silver Bear JHP in my CZ-82. However, I believe the shorter barrel of the P-64 drops the velocity too much for reliable expansion of hollow points. I could be wrong, but I feel more confident with the FMJ round.
Just my opinion....
Just my opinion....
Re: ball or jhp
For the time being, lead cast (4 gr unique).
May switch to silver bear hp tho when I get some. Problem is, if HP doesn't expand, you'll get fmj like penetration, if it does you'll get less penetration, but the expansion.
I am considering staggering them....
May switch to silver bear hp tho when I get some. Problem is, if HP doesn't expand, you'll get fmj like penetration, if it does you'll get less penetration, but the expansion.
I am considering staggering them....
Re: ball or jhp
I read about not using the p-64 with some of the hotter ammo on here, and other places, so I shot an email over to Buffalo Bore and asked them about using the 115 gr load out now in the gun, and also when the +p jhp will be available.
They responded with this:
"I see no reason why you cannot us it in your P-64 as a lot of other
customers do.
Whenever the bullets arrive, which was supposed to be in May 2010, we will
make the ammo, but that is all I know."
They say there should be no problem with the heavier load in the p-64.
They responded with this:
"I see no reason why you cannot us it in your P-64 as a lot of other
customers do.
Whenever the bullets arrive, which was supposed to be in May 2010, we will
make the ammo, but that is all I know."
They say there should be no problem with the heavier load in the p-64.
Re: ball or jhp
The only problem here is that there are no, 0, none, zip, nada, Nolla, zed, صفر, Нула, 零, cero factory spare parts available. If they're wrong, you are out 1 nice carry gun.mychoads wrote:I read about not using the p-64 with some of the hotter ammo on here, and other places, so I shot an email over to Buffalo Bore and asked them about using the 115 gr load out now in the gun, and also when the +p jhp will be available.
They responded with this:
"I see no reason why you cannot us it in your P-64 as a lot of other
customers do.
Whenever the bullets arrive, which was supposed to be in May 2010, we will
make the ammo, but that is all I know."
They say there should be no problem with the heavier load in the p-64.
John has a long mustache