p-64 they have 13 left

jeepman3366 · Post by **jeepman3366** » January 20th, 2010, 9:49 pm

they have 13 left and mine was in great shape http://www.militarygunsupply.com/shop2/ ... cts_id=918

pmeguy · Post by **pmeguy** » January 27th, 2010, 11:06 pm

Just ordered my first P64 from these guys. I hope it is a good one.

jeepman3366 · Post by **jeepman3366** » January 28th, 2010, 12:03 am

went out and shot mine sunday perfect in every way

zakbradshaw · Post by **zakbradshaw** » January 28th, 2010, 10:26 pm

I am fortunate enough to live close to Military Gun Supply, and just went and picked up my first P-64 this evening. It is marked 1973, and is in very good condition. I brought it home, tore it down, and gave it a good cleaning. Can't wait to try it.

tiber1 · Post by **tiber1** » February 6th, 2010, 12:15 am

I got one of these this past weekend. There was a little bit of wear on the left front of the slide and some scratches on the right side, but other then that it looks unissued. I've yet to see any cosmoline on the gun, actually the gun is pretty bone dry. Needs a good oiling and some of the edges on some of the bits, like the Safety Detent need a touch of 600 grit.

1968 btw!

pmeguy · Post by **pmeguy** » February 6th, 2010, 9:01 am

I ordered on a Wednesday night and received it the following Tuesday through my FFL holder. It is a '68 with a few surface nicks but I'm sure it has never been fired. The internals are brand new and the gun is full of oil and cosmoline. I hope to clean it up today. I like it alot, except that trigger pull... hopefully cleaning, lube, and a Wolff spring will slick it up a bit. Well-made little gun.

jeepman3366 · Post by **jeepman3366** » February 6th, 2010, 5:11 pm

they only have 4 left as of saturday

stentheawesome · Post by **stentheawesome** » February 6th, 2010, 5:57 pm

I grabbed one of these the other day.

She's a 76' triangle hammer and in great shape.

Haven't shot her yet but...

Already replaced the recoil with a Wolf 20 lb spring (had to taper ends slightly) and an 18 lb hammer spring. Makes the DA much nicer! And polished the feed ramp.

Should be a good CCW!

tiber1 · Post by **tiber1** » February 6th, 2010, 7:37 pm

I polished the feed ramp and replaced the springs on mine. Took it fairly well apart and still did not see any cosmo or oil on it. Taking it to the range tomorrow and drop some rounds through her to see how she dances!

jstarck · Post by **jstarck** » February 12th, 2010, 9:42 am

I'm a new guy here. Glad I found this link, because I ordered the last one they had last night. Hopefully, it'll make it to my FFL by next Tuesday so I can get my hands on it.

This board was incredibly valuable and the information here helped me decide to go with the P64 for my first CCW piece. Thanks to all of you for the great info here.

boomer · Post by **boomer** » February 12th, 2010, 12:42 pm

The secret is out.....You don't have to get a second mortgage on the house to get a quality made firearm for a CCW. I now carry a P 64 everyday and must say it is my favorite gun...sorry Gaston and John Moses.....Is that a Polka I hear playing in the background!

circlingbear · Post by **circlingbear** » February 12th, 2010, 8:13 pm

New to the group.
I would appreciate if someone could give me any leads to a p-64 at the right price

jbradshaw3 · Post by **jbradshaw3** » February 12th, 2010, 8:15 pm

aimsurplus.com has them for $169. Of course, you have to pay shipping and ffl transfer. Still not too bad, though.

jstarck · Post by **jstarck** » February 12th, 2010, 9:41 pm

http://www.dansammo.com/firearms.asp has them for $159.

jglass4763 · Post by **jglass4763** » February 23rd, 2010, 1:10 pm

Nice looking price and guns on their site.

The Unofficial P64 Resource Forum