loading 6+1
loading 6+1
win you load 6+1 do you chamber 1 from the mag, and refill the mag? kinda hard to get one in through the eject port. just wondering.
-
- Member
- Posts: 121
- Joined: December 7th, 2008, 11:53 pm
- Location: Central Texas
loading 6+1
I chamber from the magazine and then top the magazine off.
-
- Member
- Posts: 113
- Joined: September 18th, 2006, 4:38 am
- Location: Behind the Zion Curtain
loading 6+1
I'll chamber from the magazine and top the magazine off.
Just remember to test this out with your P-64, and with the ammo you plan to carry. Some people recommend against 6+1 due to FTFs, so 6+1 might not work in all P-64s and/or with all ammo brands.
Myself, my '75 feeds 6+1 with Sellier and Bellot FMJ without problems. This was established with a lot of range time, and I trust my particular rig. I also keep checking to make sure this works, so it won't bite me in the rear later.
6+1 can be a low number to begin with, but a FTF can be even worse when you need your P-64 the most...
Just remember to test this out with your P-64, and with the ammo you plan to carry. Some people recommend against 6+1 due to FTFs, so 6+1 might not work in all P-64s and/or with all ammo brands.
Myself, my '75 feeds 6+1 with Sellier and Bellot FMJ without problems. This was established with a lot of range time, and I trust my particular rig. I also keep checking to make sure this works, so it won't bite me in the rear later.
6+1 can be a low number to begin with, but a FTF can be even worse when you need your P-64 the most...
loading 6+1
On many pistols, I've been told you can damage the extractor if you release the slide on a round in the chamber. I don't think it's a huge deal, but why risk it.jhandy wrote:win you load 6+1 do you chamber 1 from the mag, and refill the mag? kinda hard to get one in through the eject port. just wondering.
The procedure that most people follow is:
1) Chamber from a loaded magazine
2) Remove the magazine
3) Holster the pistol
4) Top off the mag
5) Insert the magazine into the pistol
I haven't carried the P-64 yet since I'm still looking for a holster.
loading 6+1
Dickfunk sells some nice holsters on this sight. check them out.semtex wrote:On many pistols, I've been told you can damage the extractor if you release the slide on a round in the chamber. I don't think it's a huge deal, but why risk it.jhandy wrote:win you load 6+1 do you chamber 1 from the mag, and refill the mag? kinda hard to get one in through the eject port. just wondering.
The procedure that most people follow is:
1) Chamber from a loaded magazine
2) Remove the magazine
3) Holster the pistol
4) Top off the mag
5) Insert the magazine into the pistol
I haven't carried the P-64 yet since I'm still looking for a holster.
loading 6+1
They are all right. I wore out an extractor on a 45 auto by dropping a rd in the chamber each time I loaded. Now I do it like the above members said.
loading 6+1
by dropping a round in the chamber, do you mean you pushed a round in through the ejection hole in the slide while it was pulled back?
loading 6+1
I would say thats what he is saying.