floppy trigger
floppy trigger
Just purchased a new to me 1970 model P64. Like all P64's this too had a really hard trigger pull, but seemed ok otherwise. Got it home, cleaned it, etc. and found that after racking the slislide the trigger no longer seemed connected. Using the decocker the hammer came down. Took it back to the shop where I was told it was missing a spring (heavily suggesting that I lost it). The spring he drew out for me is a leaf type shaped like a sickle. I took apart my '76 and can't find any leaf type springs at all. Your stickie of a '70 doesn't show any leaf type springs either. Is this guy jerking my chain or am I missing something?(he still has the gun, now two weeks)
Instigator/Conservative Underground
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
floppy trigger
crzbiker
don't know about a leaf type spring
but I make 2 kinds of springs for the P-64 maybe he was talking one of these
http://p64.proboards67.com/index.cgi?bo ... hread=1822
NORM
don't know about a leaf type spring
but I make 2 kinds of springs for the P-64 maybe he was talking one of these
http://p64.proboards67.com/index.cgi?bo ... hread=1822
NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976
floppy trigger
Did you pull the trigger with the slide and grips removed?
Sounds like you are either missing the trigger return spring or more likely the trigger bar has slipped out of contact with the trigger return spring. I think Norm can help you reconnect the trigger bar to the trigger return spring.
Sounds like you are either missing the trigger return spring or more likely the trigger bar has slipped out of contact with the trigger return spring. I think Norm can help you reconnect the trigger bar to the trigger return spring.
Last edited by pshootr on March 18th, 2009, 7:31 pm, edited 1 time in total.
floppy trigger
Thanks for the reply Norm. The picture he drew wasn't anything like yours. I am inclined to think he doesn't know what he's doing. I think I'll get the gun back and do it myself. I usually can do all the work that doesn't need machining, etc with the help of your great pictures and guidance. Only reason I took it back was the warranty period. My mistake.
Pshootr- I didn't pull the trigger with the slide or grips removed. Oddly enough though, the grips were a little loose when I got the gun. Usually I have to work them off when the gun is new.
Pshootr- I didn't pull the trigger with the slide or grips removed. Oddly enough though, the grips were a little loose when I got the gun. Usually I have to work them off when the gun is new.
Instigator/Conservative Underground
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
floppy trigger
crzbiker
it wasn't till they went with the triangle hammer, they changed the trigger return spring with a .032 dia. wire before they used a .028 dia wire, its very common for a P-64 with a round hammer to have the trigger return spring brake on them
NORM
it wasn't till they went with the triangle hammer, they changed the trigger return spring with a .032 dia. wire before they used a .028 dia wire, its very common for a P-64 with a round hammer to have the trigger return spring brake on them
NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976
-
- Veteran member
- Posts: 650
- Joined: November 19th, 2006, 8:28 pm
- Location: michigan, down the river
floppy trigger
Norm, does that include the round hammers with the "A" designation stamped below the hammer on the frame on left side? That means some sort of upgrade doesn't it?
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
floppy trigger
LEO
that's the upgrade they talk about when they say they upgraded the trigger I think, that's the only one I have found any way
NORM
that's the upgrade they talk about when they say they upgraded the trigger I think, that's the only one I have found any way
NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976
floppy trigger
Well, I went down and got the gun back and ordered new trigger springs from Norm .While I was at it I ordered a set from Wolf. It'll be like a new gun! Thanks to Norm and the others for all your input.
Instigator/Conservative Underground