Page 1 of 1

Which hollow point?

Posted: January 23rd, 2006, 6:45 pm
by dutchuncle
I like my P-64 so much, I have been using it as my open carry gun more and more. (I use a Kel-Tec P3AT for concealed carry). I have had no problem with using .380 Gold Dots in the Kel-Tec, but have only fed a few Makarov Gold Dots through my P-64. Have any of y'all had experience with various hollow point Mak rounds? Any you particularly like? Any to avoid?

Which hollow point?

Posted: January 23rd, 2006, 10:55 pm
by mikethewreck
Hornady has been working for me.

Which hollow point?

Posted: January 23rd, 2006, 11:07 pm
by ozarker
I still have some 115gr left... Hard on the gun and hand. Carry Hornady

Which hollow point?

Posted: January 24th, 2006, 1:31 am
by b52stan
90 gr Fiocchi HP is even better because it's much hotter, but recoil isn't bad because of ligh bullet wt.
Problem is, it's been discontinued, so you have to look for old stock.

Which hollow point?

Posted: January 24th, 2006, 2:41 am
by steve98664
Anybody tried Hornady custom XTP 9mm Mak? @ $16 for 25 I'd wanna know before I buy!

Which hollow point?

Posted: January 24th, 2006, 8:01 am
by abwehr
Do standard Hollow Points really do anything in this caliber? I am waiting on Cor-Bon to come out with their PowR-Ball round. IF it is anything as good as the .40 S&W, it will be a winner in 9mm Makarov!

Which hollow point?

Posted: January 24th, 2006, 2:45 pm
by tunnelrat
Anybody tried Hornady custom XTP 9mm Mak? @ $16 for 25 I'd wanna know before I buy!
Hornady's website claims 1000 fps at muzzle, and 221 lb/ft. of energy. That's about the same as very high end .380acp. However, it tends to be very reliable, so that is what I am carrying until I can find something hotter.

You might want to try Golden Loki's website:
http://www.goldenloki.com/ammo/gel/9x18/gel9x18.htm

Which hollow point?

Posted: January 24th, 2006, 3:34 pm
by abwehr
tunnelrat,

Thanks for posting thje website! I was impressed with all the rounds tested; they actually expanded well! You are right about the Hornady round, it expanded and stayed together.

Which hollow point?

Posted: January 24th, 2006, 10:21 pm
by jbailey
I've run a 25 box of Hornady for reliability testing (no problems) but I usually want several hundred before trusting it for carry, and it's two expensive for my blood. (Odd choice of phrase?) I had a big supply of Barnaul 92 g HP from my MAK days, price was right and of course the MAK chambers anything (at least mine does.) Hoping to find more....

If you want to really make an impression (on the target AND your hand), try the 120 g HP Silver Bears! No thanks!

Which hollow point?

Posted: January 24th, 2006, 10:46 pm
by amd6547
I like the 115 Silver Bears. From what I have read, the Hornady dosn't make 1000fps. While the Silver Bear might not be fun for an extended range session, for self defense, it squeezes every foot-pound out of the makarov cartridge. If I wanted a 380, I would buy one.
On the other hand, I have no qualms about carrying FMJs in the caliber, either
I dont like spending $16 for 25 rounds of Hornady, when I can get 50 for $7.

Which hollow point?

Posted: January 25th, 2006, 6:15 pm
by tunnelrat


9x18 Fired from a Bulgarian Makarov:

TCW 95 gr FMJ Average Velocity = 1043 ft/sec
Fiocchi 95 gr FMJ Average Velocity = 1018 ft/sec
CorBon 95 gr JHP +P Average Velocity = 1098 ft/sec
Hornady 95 gr XTP Average Velocity = 937 ft/sec

Although the Hornady XTP is clearly slower, Steven Camp has noted in his informal expansion tests (water, and wetpack), that it seems to expand more aggressively than in other calibers he's tried.

Which hollow point?

Posted: January 25th, 2006, 7:07 pm
by amd6547
In the 9mm makarov, I prefer penetration and velocity to overpriced aggressive expansion. I also saw a series of tests, and I'm sorry I don't have the link, where the silver bear out-penetrated the Hornady by a good margin in water AND expanded.
I wish you would all email mike mcnett at doubletap ammo and urge him to bring out a makarov load. I have never been too impressed with cor-bon. Doubletap has made some of the finest self-defense loads in 10mm, 40s&w, 357sig and 45acp. I am sure mike could produce the load we are all looking for. I have used his 40s&w and 357sig loads, and they produce everything they promise at a reasonable price. Check out their website, www.doubletapammo.com

Which hollow point?

Posted: January 25th, 2006, 8:10 pm
by abwehr
amd6547,

Thanks for the link. I will try to e-mail Mr. McNett to inquire about the 9mm Mak round. I will also invite him to drop by the P-64 Forum to visit if possible.