The Unofficial P64 Resource Forum

If you are pointing the pistol away from you with the slide removed then look at the right side of the disconector. It can catch on the safety lever inside the slide. There is supposed to be a very slight angle where the sharp edge of the disconector is filed off at the factory. Some are not filed ...

Alright, here's what I've done:

1) Installed a new trigger spring from Norm.

2) Cleaned up the disconnector.

Unfortunately, the problem still exists.

I'll try looking at TMG's suggestion next, but there aren't really any sharp edges on the disconnector.

I think it means that members are recognized because of stored cookies, guests are visible to the server as IP addresses, and the invisible are those whose IP address is not visible to the server. Nope. Invisibility is a setting in your profile. Click on "profile" then "modify profil...

Looks amazing. How long would you say this took you to do? And how much of an investment is it for all the necessary materials?

From the pictures, the gun appears a little rough - or maybe textured is the word I'm looking for. Is that just a result of the camera flash?

First off, thanks everyone for the replies and suggestions! The slide appears to be completely flush and where it should be. I've tried doing the "mag slap" after reading another thread about DA problems and the disconnector. The hammer spring is stock, so I'm not sure that would be an iss...

Not exactly sure what the issue is here. ???

If the P64 is empty...the DA pull works fine.

But if there's a round chambered or an empty casing inserted the trigger pulls straight back like the safety is on.

Anyone have any ideas?