Search found 61 matches
- March 15th, 2017, 1:08 am
- Forum: General P-64 Discussion
- Topic: Ouch
- Replies: 9
- Views: 8774
Re: Ouch
The Polish Iron grips will help a lot. If you change the grip, get his extended magazine release too.
- March 13th, 2017, 3:05 pm
- Forum: General P-64 Discussion
- Topic: A new obsession
- Replies: 10
- Views: 9221
Re: A new obsession
Welcome to the forum. Like what was mentioned, you got a good deal.
- March 10th, 2017, 2:19 pm
- Forum: Reloading
- Topic: Makarov brass
- Replies: 3
- Views: 11365
Re: Makarov brass
That's my concern as well; which is why I'll be obiviating the 9mm Luger head stamp or at least mark it permanently somehow to note a difference.Poppy42 wrote:.......................... The chances of one of those trimmed cases inadvertently loaded to 9 mm Luger specs by myself or my son concerns me. ..........
- March 10th, 2017, 3:33 am
- Forum: Reloading
- Topic: Loading the 9x18mm w/ Luger brass
- Replies: 57
- Views: 83040
Re: Loading the 9x18mm w/ Luger brass
Without looking too far, you can find range 9mm Luger brass for $0.02 - $0.04 each; which quite a bit cheaper.
- March 10th, 2017, 3:26 am
- Forum: Reloading
- Topic: Makarov brass
- Replies: 3
- Views: 11365
Re: Makarov brass
Trimming 9mm Luger is probably cheapest route. On a different forum we talked about ways to mark the brass so it would be unique; which ranged from obliterating the head stamp to marking with a sharpie. I have a friend that is a jeweler, who said he would make a steel stamp for me that I could stamp...
- March 6th, 2017, 3:14 pm
- Forum: General P-64 Discussion
- Topic: P64 Safety Catch
- Replies: 3
- Views: 4136
Re: P64 Safety Catch
Wow, $50! It might be cheaper to buy a spare gun.
- March 5th, 2017, 12:56 am
- Forum: Modifications, Fixes, and Repairs
- Topic: Need help with a safety stuck in the safe position
- Replies: 18
- Views: 16271
Re: Need help with a safety stuck in the safe position
Awesome, glad that you got it back together and working better.
- March 4th, 2017, 12:12 am
- Forum: Modifications, Fixes, and Repairs
- Topic: Need help with a safety stuck in the safe position
- Replies: 18
- Views: 16271
Re: Need help with a safety stuck in the safe position
If your gun was fairly new (not used and in storage), it could be just gunked up in the safety and firing pin area. When I first read your post, I was wondering as my safety and firing pin were somewhat gunked up, so I removed them and cleaned everything up to free up the safety. There is a small sp...
- March 3rd, 2017, 2:29 pm
- Forum: Modifications, Fixes, and Repairs
- Topic: Need help with a safety stuck in the safe position
- Replies: 18
- Views: 16271
Re: Need help with a safety stuck in the safe position
Are we talking about a P64?
- February 18th, 2017, 6:55 pm
- Forum: General P-64 Discussion
- Topic: Slide stuck! Help!
- Replies: 8
- Views: 8365
Re: Slide stuck! Help!
Glad you got it working again. After I posted before, I remembered having the same problem with mine.
- February 18th, 2017, 12:59 pm
- Forum: Photo Gallery
- Topic: P64 & Friends
- Replies: 13
- Views: 22642
Re: P64 & Friends
When I first read the post, I thought you were looking for another P64, and made the response. Then later, looked at the thread again, and added the last sentence.
- February 18th, 2017, 3:03 am
- Forum: Photo Gallery
- Topic: P64 & Friends
- Replies: 13
- Views: 22642
Re: P64 & Friends
Here is one for $249, if you figure the second mag in the mix, it isn't too bad of a deal.
https://www.classicfirearms.com/polish- ... pistols-ec
But then again, maybe you weren't looking for another P64.
https://www.classicfirearms.com/polish- ... pistols-ec
But then again, maybe you weren't looking for another P64.
- February 18th, 2017, 2:57 am
- Forum: General P-64 Discussion
- Topic: Slide stuck! Help!
- Replies: 8
- Views: 8365
Re: Slide stuck! Help!
I might try tapping it with a plastic hammer, but nothing steel. Even a block of wood but nothing hard. What you are trying to do is unstick not wedge it more. If you tap it one direction and it doesn't free it's self, try a different direction. If you hit it hard, you run the risk of springing the ...
- February 14th, 2017, 4:29 am
- Forum: Modifications, Fixes, and Repairs
- Topic: P-64 Extended Mag Release
- Replies: 96
- Views: 103119
Re: P-64 Extended Mag Release
I just received my P64 from J&G and am interested in an extended magazine release. I've read the posted comments and would like to obtain one of DUO_Z made extended magazine release to install with the Wolff spring kits that I have on the way. Does anyone have any contact information for DUO_Z?...
- February 8th, 2017, 2:55 am
- Forum: General P-64 Discussion
- Topic: Just got a 1968 P64 yesterday
- Replies: 10
- Views: 8008
Re: Just got a 1968 P64 yesterday
That is what I noticed too!BeoBill wrote: I think you'll find that the Polish Iron grips will tame your P64's "snappiness" .........................