Also, use a SMALL amount of good gun grease on the disconnector before you put it back in its slot.
Jack
Search found 5 matches
- January 22nd, 2014, 8:24 pm
- Forum: Modifications, Fixes, and Repairs
- Topic: P64 Trigger Bar Issue
- Replies: 11
- Views: 11080
- January 17th, 2014, 12:10 pm
- Forum: Modifications, Fixes, and Repairs
- Topic: P64 Trigger Bar Issue
- Replies: 11
- Views: 11080
Re: P64 Trigger Bar Issue
I have re-arsenaled and brought back to like-new 80+ of these guns. My experience shows that most of the time this problem is caused by a worn-faulty disconnector and/or weak trigger spring.
Replacing these two parts has solved the problem for me.
Jack
Replacing these two parts has solved the problem for me.
Jack
- September 6th, 2013, 10:02 pm
- Forum: Modifications, Fixes, and Repairs
- Topic: P-64 not chambering
- Replies: 16
- Views: 13588
Re: P-64 not chambering
We see this periodically in the shop. Every time it has been a fouled magazine not allowing the follower to track true in the mag body. Previous response was absolutely correct. Take mag apart, clean thoroughly, and apply small amount of oil inside the body.
Jack's Guns
Jack's Guns
- September 4th, 2013, 2:35 pm
- Forum: General P-64 Discussion
- Topic: double action trigger weight.
- Replies: 14
- Views: 13509
Re: double action trigger weight.
Here at our gun shop we refurbish the P-64 to like new condition. We also replace the hammer spring with a Wolff 17lb and the recoil spring with a Wolff 22lb. The new springs accomplish two things. First, it makes the double action much smoother and lighter and the heavier recoil spring helps absorb...
- September 1st, 2013, 5:27 pm
- Forum: General P-64 Discussion
- Topic: P-64 advice!! Please help!
- Replies: 8
- Views: 7658
Re: P-64 advice!! Please help!
Hello, If you haven't gotten the safety issue resolved, you might try what we do here in our gunsmith shop. We restore P-64's and do 10 at a time. After removing the slide, the best way to work on the safety is to push the firing pin as far forward as possible and grab it with a pair of needle nose ...