Search found 827 matches

by Ketchman
Yesterday, 9:30 pm
Forum: General P-64 Discussion
Topic: FEG SMC 380 JUST STOPPED FIRING!!
Replies: 4
Views: 35

Re: FEG SMC 380 JUST STOPPED FIRING!!

it does not, that is the importer. Take it to a smith.
by Ketchman
Yesterday, 7:02 pm
Forum: General P-64 Discussion
Topic: P-64 Not Fully Chambering Rounds
Replies: 10
Views: 103

Re: P-64 Not Fully Chambering Rounds

I would do the polishing by hand because of the need to make sure you remove as little metal as absolutely possible.
by Ketchman
Yesterday, 7:00 pm
Forum: Other 9x18's
Topic: PA-63 MANUAL AND HUNGARIAN WEAPONS
Replies: 7
Views: 1788

Re: PA-63 MANUAL AND HUNGARIAN WEAPONS

Nice work. I recently bought the .32 ACP version and I like it quite a bit. Funny thing is the frame on it is anodized green. :shock: Had a PA-63 before but foolishly sold it to buy, of all things my P-64.
by Ketchman
Yesterday, 6:43 pm
Forum: General P-64 Discussion
Topic: FEG SMC 380 JUST STOPPED FIRING!!
Replies: 4
Views: 35

Re: FEG SMC 380 JUST STOPPED FIRING!!

I see a gunsmith in your future.
by Ketchman
November 17th, 2017, 1:09 pm
Forum: Modifications, Fixes, and Repairs
Topic: Please Help -- 1 oz SA trigger pull
Replies: 27
Views: 317

Re: Please Help -- 1 oz SA trigger pull

I would buy the parts you can get as soon as you can, they tend to dissapear quickly. I personally would go for the new part because of the scarcity of them.
by Ketchman
November 17th, 2017, 12:16 am
Forum: Modifications, Fixes, and Repairs
Topic: Please Help -- 1 oz SA trigger pull
Replies: 27
Views: 317

Re: Please Help -- 1 oz SA trigger pull

Numrich currently has P-64 parts in stock and has a hammer in stock listed at $35.00
Numrich has quite a few different spare parts.
by Ketchman
November 16th, 2017, 11:29 pm
Forum: Modifications, Fixes, and Repairs
Topic: Please Help -- 1 oz SA trigger pull
Replies: 27
Views: 317

Re: Please Help -- 1 oz SA trigger pull

Are there any visible tool marks that would indicate a poorly attempted recut job?
by Ketchman
November 16th, 2017, 1:38 pm
Forum: Modifications, Fixes, and Repairs
Topic: Hammer binding caused Polish Iron grips?
Replies: 4
Views: 70

Re: Hammer binding caused Polish Iron grips?

+1 on what GuitarmanNick said.
by Ketchman
November 15th, 2017, 12:18 am
Forum: Modifications, Fixes, and Repairs
Topic: Hammer binding caused Polish Iron grips?
Replies: 4
Views: 70

Re: Hammer binding caused Polish Iron grips?

There is a chance. Try pulling off the grips, putting a VERY SMALL amount of grease on the trigger bar, put the grips back on and try running the trigger once or twice, then pulling off the grips and checking the inside to see if any grease got transferred to the grips which would indicate contact b...
by Ketchman
November 13th, 2017, 1:44 am
Forum: Modifications, Fixes, and Repairs
Topic: Please Help -- 1 oz SA trigger pull
Replies: 27
Views: 317

Re: Please Help -- 1 oz SA trigger pull

The P64 is an extremely well made sidearm, better than a large number of currently produced weapons, however, how the hammer / trigger bar / sear design got approved is questionable due to the light SA pull, one wonders why a redesign was not done. And it is a bit odd that there seems to be such a d...
by Ketchman
November 12th, 2017, 8:42 pm
Forum: Modifications, Fixes, and Repairs
Topic: Please Help -- 1 oz SA trigger pull
Replies: 27
Views: 317

Re: Please Help -- 1 oz SA trigger pull

Hmmm. Well my occurance was 12-13 years ago so maybe they changed policy sometime after my issue. And since they are now kaput it no longer matters. :D
by Ketchman
November 12th, 2017, 12:26 pm
Forum: Modifications, Fixes, and Repairs
Topic: Please Help -- 1 oz SA trigger pull
Replies: 27
Views: 317

Re: Please Help -- 1 oz SA trigger pull

I still think the issue is the hammer. Check the sear engagement notches and see if they are damamged or if the edges are nice and square and sharp. Also check the trigger return spring and see if it is working properly. Otherwise, find a smith who can diagnose a possible problem. The other problem ...
by Ketchman
November 11th, 2017, 10:09 pm
Forum: Modifications, Fixes, and Repairs
Topic: Please Help -- 1 oz SA trigger pull
Replies: 27
Views: 317

Re: Please Help -- 1 oz SA trigger pull

The P64 does not take special knowledge. If your gunsmith is good he will be able to find information he needs if he cannot find what is wrong. Otherwise take it to a different 'smith. And Curly did the guy behind the counter know you personally 'cause I was told that company policy forbade them fro...
by Ketchman
November 11th, 2017, 1:35 am
Forum: Modifications, Fixes, and Repairs
Topic: Please Help -- 1 oz SA trigger pull
Replies: 27
Views: 317

Re: Please Help -- 1 oz SA trigger pull

ok, if you let someone dry fire the gun before selling it, take snap caps with you, and THEY deem it acceptable then you are not selling them a gun with a feature they are unaware of. And I will NOT buy a sidearm that I cannot test the trigger on. Gander Mountain was a major retailer that had lost m...