The Unofficial P64 Resource Forum

Thank you for the backup Weasel. And one question usagi, how can the trigger bar bind on the Polish Iron grips "with zero pressure on the grip"? Please tell me how to pull the trigger without holding the gun by the grip?

I would think knowledge of the metallurgy of the part would be required before a proper heat treatment could be done.

The number of people who have issues with the Polish Iron grips is very small compared to the number of people who own them.

Changing out the hammer spring for lighter ones has made the SA trigger too light for many here. I am running the 17lb spring and I found that while it did lighten up the SA a bit I can work with it but many can't. So if you go to the 18lb do not throw the 20lb away. Try it out for a bit and see wha...

Not a bad line of reasoning. Where did you get the Star BM recoil spring? I have 2 and love them but I am thinking the recoil springs should get replaced soon.

Ok, I just reread all your posts about this problem. Did this gun come to you with the different power recoil springs? Because I suspect that the standard power spring, ie original oem spring, may have become too weak to funtion correctly. However, I am happy that you seem to have corrected the prob...

Depending on where you call home finding ammo may or may not be problematical. Let us know if the hammer spring swap helps.

Funny, all my.magazines slide in and out easily and I have 4 or 5. Hmmmm. Well at least you have mags now. Now to the range and see how and if they all work well.

Sorry did not mean anything by that question but we have had others here that did not know for whatever reason. At this time I am out of ideas, sorry.

Is the recoil spring on the barrel correctly? The narrow end needs to be on the breach end of the barrel. I am thinking that if it is reversed that maybe the slide is not retracting as far as possible thereby causing the weak ejection and stovepipe issue. Maybe?

Oh, I misunderstood, sorry. I had to make a temporary secure space once too and I used a Stack On gun cabinet. I set it on a concrete block in the basement of the temporary abode with the back against the steel support collum the centerline house supports were resting on and then wrapped a 3/4 inch ...

Nice work. So, 3 new mags for carry and a modded one for range work. Let us know how the mags functions please. And again congrats for initiative.

Depending on the departments attitude towards the local peasantry traveling armed a small NBC equipped bunker in your vehicle may not be deemed acceptable. Before purchasing a "mobile safe" please check you tube or vimeo for the locksmith guy that shows how incredibly easily most of these safes are ...

Is the extractor hook broken? This gun being a straight blowback action will fully cycle without an extractor but fully positive extraction of the case so it always clears the ejection port is not 100% without the help of the extraxtor hook pulling the case back hard against the ejector. Check the e...

I bet modding it so the cut is deeper would work. How are you with tools?