Search found 15 matches

by juanace
October 26th, 2011, 8:14 pm
Forum: Modifications, Fixes, and Repairs
Topic: Slide Popped Off My P64 During Firing
Replies: 12
Views: 12006

Re: Slide Popped Off My P64 During Firing

I had my PA 63 slide fly forward once. The trigger pull was so bad/heavy that I did forced the trigger guard down pulling the trigger and off we gooooo!
by juanace
October 24th, 2011, 10:47 am
Forum: Modifications, Fixes, and Repairs
Topic: Trigger responds fully w/ Dummy Round, but not LIVE Ammo
Replies: 15
Views: 13528

Re: Trigger responds fully w/ Dummy Round, but not LIVE Ammo

kilt1irono I had a similar problem with mine. Trigger will not reset. I would suggest to push/pull the slide back about 1/16 to 1/4 off an inch back, you should hear the disconnector go into the slide and the trigger should work in DA/SA. I was having this problem when decoking the gun. The disconne...
by juanace
October 19th, 2011, 9:37 pm
Forum: General P-64 Discussion
Topic: Soon to be P -64 owner.
Replies: 28
Views: 19629

Re: Soon to be P -64 owner.

I got my Wolf spring kit a few days ago. My update, Replaced the hammer spring with the 20# one. I can pull the trigger on DA every time with some difficulty. WIll skip the 19# one. So I will go to the 18# and test fire when I get some ammo. It is a pain to remove the hammer spring, but is about thr...
by juanace
October 19th, 2011, 9:23 pm
Forum: Modifications, Fixes, and Repairs
Topic: Trigger problem P-64
Replies: 8
Views: 6444

Re: Trigger problem P-64

Replaced the hammer spring with the 20# one. I can pull the trigger on DA every time with some difficulty. WIll skip the 19# one. So I will go to the 18# and test fire when I get some ammo. It is a pain to remove the hammer spring, but is about three times the pain to get it back in to position to g...
by juanace
October 11th, 2011, 9:32 pm
Forum: Modifications, Fixes, and Repairs
Topic: Trigger problem P-64
Replies: 8
Views: 6444

Re: Trigger problem P-64

Wolff spring kit in. Will update ASAP. Need more ammo.
by juanace
October 11th, 2011, 9:31 pm
Forum: General P-64 Discussion
Topic: Soon to be P -64 owner.
Replies: 28
Views: 19629

Re: Soon to be P -64 owner.

My wolff springs set came in today. Soon to be installed. However I need more ammo. More to come.
by juanace
October 7th, 2011, 12:39 am
Forum: Modifications, Fixes, and Repairs
Topic: Need a new decoker/safety
Replies: 25
Views: 17142

Re: Need a new decoker/safety

Pardon my ignorance, but what is the meaning of R2? I spent 20 years in the USAF as a POL troop and do not recall hearing that from the crew chiefs.
by juanace
October 4th, 2011, 10:22 am
Forum: General P-64 Discussion
Topic: Soon to be P -64 owner.
Replies: 28
Views: 19629

Re: Soon to be P -64 owner.

Posted from fixes section. Just to follow up. disassembled the slide and cleaned up some areas with my files and polished the safety plunger and seens to be working a little better. Next time I take the safety out to change the firing pin spring I will polish some more with my dremel. The safety/dis...
by juanace
October 4th, 2011, 10:14 am
Forum: Modifications, Fixes, and Repairs
Topic: Trigger problem P-64
Replies: 8
Views: 6444

Re: Trigger problem P-64

I disassembled the slide and cleaned up some areas with my files and polished the safety plunger and seens to be working a little better. Next time I take the safety out to change the firing pin spring I will polish some more with my dremel. The safety/disconnetor issue seems to have gone away due t...
by juanace
September 30th, 2011, 7:29 pm
Forum: General P-64 Discussion
Topic: Soon to be P -64 owner.
Replies: 28
Views: 19629

Re: Soon to be P -64 owner.

The Only Sarge No I did a quick cleaning, but it worked more than OK today. Will be taken apart soon. I am pasting below my experience today. Slide soaking on mineral spirits as I write this. Took it to the range today, mag fell out on the firsts shoot. Rookie mistake, apparently was not seated prop...
by juanace
September 30th, 2011, 7:25 pm
Forum: Modifications, Fixes, and Repairs
Topic: Trigger problem P-64
Replies: 8
Views: 6444

Re: Trigger problem P-64

juniustaylor Thanks I will do. Slide soaking on mineral spirits as I write this. Took it to the range today, mag fell out on the firsts shoot. Rookie mistake, apparently was not seated properly. Did not happen again. The trigger problem creepep up once or twice more and I belief is the safety/discon...
by juanace
September 30th, 2011, 10:36 am
Forum: Modifications, Fixes, and Repairs
Topic: Trigger problem P-64
Replies: 8
Views: 6444

Trigger problem P-64

Posted also in the general P 64 discussion section. Well got my toy yesterday and looks OK. Some holster wear in the left side and overall looks OK, not excellent. Paid extra ten bucks for hand pick and I guess wasted. However it has some big nicks by the barrel hood that looks that were filed out a...
by juanace
September 30th, 2011, 10:30 am
Forum: General P-64 Discussion
Topic: Soon to be P -64 owner.
Replies: 28
Views: 19629

Re: Soon to be P -64 owner.

Well got my toy yesterday and looks OK. Some holster wear in the left side and overall looks OK, not excellent. Paid extra ten bucks for hand pick and I guess wasted. However it has some big nicks by the barrel hood that looks that were filed out and not refinish. I hope it does not cause any functi...
by juanace
September 28th, 2011, 7:06 am
Forum: General P-64 Discussion
Topic: Soon to be P -64 owner.
Replies: 28
Views: 19629

Re: Soon to be P -64 owner.

Thanks you for the welcome. I guess C&R means trouble. LOL. UPS tracking number already e-mailed to me by AIM. Wainting for the new toy.
by juanace
September 27th, 2011, 3:13 pm
Forum: General P-64 Discussion
Topic: Soon to be P -64 owner.
Replies: 28
Views: 19629

Soon to be P -64 owner.

Been around the forum for a few weeks. Finally got my C&R last Friday. Bougth two used mags from SOG as an appetizer. Today placed my order for my P-64 from AIM Surplus. I alreay own a PA63 for over ten years. Learning a lot from you guys already. Glad to join the club.