The Unofficial P64 Resource Forum

I tested the gun today. I first replaced the hammer spring with an 18 pound spring and the recoil spring with a 20 pound spring. Using the Wolf ammo, which was all I had the foresight to take with me, I got frequent light strikes which required a second strike to fire. I forget which hammer spring ...

Weazel the last two guys that did that never gave us a range report , so please give us one NORM I sold the pistol yesterday, without test firing it. If there's a problem I'm sure that the buyer will get back with me... I'll be looking for 3rdPig's report. I'm thinking that shortening the opposite ...

Roadweazel, That is a neat grip. what kind is it? It looks as tho it is sticking up high enough to "rub" the slide . Is this a photo illusion? The Wolf MC ball ammo I have measures 1.01" OAL. It is actually longer than your ammo and It shoots fine in mine. Thanks and Good luck ! The ...

Damn, Norm, you DA MAN :-* Thank you ever so much for your willingness to help. I'm getting exactly .364 inch across the projectile and I can see little tiny rifling marks where the nose is being pushed into the grooves and lands. OAL is .979 inch. I'd hate to buy another box of ammo for a gun that ...

OK, before I get stupid on this firearm... :( Could someone measure how much of the case is supposed to protrude from the chamber for me? I just dropped a round of Wolf in the chamber and measured from the 'top' of the chamber/barrel to the end of the round and got .135 inch or 3.43mm . Is this the ...

Understood.
The 10mm ream would be 3.7 thousandths too large at the case mouth...
Crap! Anyone in AZ want a good deal on a nice P-64 with an extra Wolff spring kit and a box and a half of Wolf ammo?

Hmmmmmmm... 'No go' on the 10mm ream (same as the case o.d.) even for just a half a milimeter? ??? I'm a mechanic by trade, in more than one field, so I understand how things need to be done properly but the chamber's so loose on these pistols that I figured making the chamber a little deeper would...

Greetings! New P64 owner from AZ and I'm having the same issue. I've checked it out and she's clean, I'm getting metal shavings at the end of the chamber if I scrape it with a pick or drill bit. The slide just isn't going far enuff forward with a round in the chamber, even if I push it forward. If I...