Mine is a .380 made in '71.
Yours in .32?
I haven't shot mine enough tio get used to the slide release.
This is the only pistol I own that I have NEVER taken completely apart (no nerve).
Search found 37 matches
- July 13th, 2012, 5:13 pm
- Forum: Other firearms...
- Topic: mauser hsc
- Replies: 11
- Views: 9424
- July 10th, 2012, 7:04 pm
- Forum: Other 9x18's
- Topic: russian makarov
- Replies: 15
- Views: 15652
Re: russian makarov
I had to push it forward a few times and I noticed when I pull the trigger guard down to remove slide and clean the trigger feels very sloppy almost like it's gonna fall out! Any thoughts? The triggerguard is all that holds the trigger in position and the trigger return spring is one of the fingers...
- July 4th, 2012, 7:01 pm
- Forum: Other firearms...
- Topic: FEG R61 Magazine Wanted
- Replies: 3
- Views: 5316
Re: FEG R61 Magazine Wanted
An R61 will take the same mags as an SMC 380 or SMC 918 the .380 and 9mm Mak mags are the same. The ones in the picture are PA63 mags and will function but stick out of the mag well.
The actual SMC mags only have 5 holes on the side.
The actual SMC mags only have 5 holes on the side.
- April 16th, 2012, 12:19 pm
- Forum: Other 9x18's
- Topic: PA-63 .... Saftey cuts left lower portion of thumb tip SO
- Replies: 9
- Views: 8141
Re: PA-63 .... Saftey cuts left lower portion of thumb tip S
I don't believe you can accidently pull the trigger and until you pull the trigger the firing pin is not lined up with the hammer.sharkey wrote:JAT
thank you PA-63 and P-64 they look the same I will check that out later today ...... I got to do something ...... Dont like to have on in throat and no safety on
- February 7th, 2012, 7:46 pm
- Forum: Other 9x18's
- Topic: weight of carry p64 vs pa63!
- Replies: 14
- Views: 13089
Re: weight of carry p64 vs pa63!
All the PA-63 goodness within a smaller package.Curly1 wrote:If you want lighter and a bit smaller try to find a SMC918 or RC61 mak version.
Size wise the difference between a PP and a PPK.
- February 6th, 2012, 10:11 pm
- Forum: Other 9x18's
- Topic: FEG PA 63 Decocker issues
- Replies: 2
- Views: 4570
Re: FEG PA 63 Decocker issues
Part 21 at 'buymilsurp.com', the 'hammer release', it sticks up through a slot in the left side of the frame. The safety cams this part down when engaged and it presses the sear out of engagement with the hammer. The top and front inside the frame should show wear marks. Polish and smooth these area...
- February 5th, 2012, 10:38 pm
- Forum: Other 9x18's
- Topic: FEG SMC 918 Parts
- Replies: 4
- Views: 6311
Re: FEG SMC 918 Parts
The PA-63 and the SMC parts are the same except for the barrel length and the grip frame length (barrel, slide, magazine, grips). All the internals interchange.
- December 28th, 2011, 8:21 pm
- Forum: Other 9x18's
- Topic: R61
- Replies: 9
- Views: 8690
Re: R61
I have that one and one on an SMC380.papabear wrote: glad to see someone else likes a "clipdraw" I have had one on one of my P-64's for some time.
Doubletap, Numrich has slides. That, a PA63, and some work will make one, and keep you busy for a couple of hours.
- December 27th, 2011, 2:29 pm
- Forum: Other 9x18's
- Topic: R61
- Replies: 9
- Views: 8690
Re: R61
The barrel came with the parts kit and was 9X18. I don't know of a source for a barrel as a separate part.
- December 26th, 2011, 8:45 pm
- Forum: Other 9x18's
- Topic: R61
- Replies: 9
- Views: 8690
Re: R61
There's a clipdraw on the other side, so function is 100%.
- December 26th, 2011, 4:12 pm
- Forum: Other firearms...
- Topic: Canik 9mm
- Replies: 2
- Views: 4610
Canik 9mm
Canik, very close copy of a CZ-75 compact except with an aluminum frame. In fact the trigger is a CZ-85 combat.
I found some buffalo horn on Ebay and made grips. This is a very nice pistol, excellent for the money.
I found some buffalo horn on Ebay and made grips. This is a very nice pistol, excellent for the money.
- December 26th, 2011, 3:37 pm
- Forum: Other 9x18's
- Topic: R61
- Replies: 9
- Views: 8690
R61
Found a parts kit on Gunbroker. Bought a frame from Buymilsurp. Found buffalo horn grips someone had attempted to fit on a PPKs on Ebay.
- April 24th, 2011, 1:18 pm
- Forum: Other 9x18's
- Topic: Trigger problem with PA-63 - FIXED
- Replies: 14
- Views: 12160
Re: Trigger problem with PA-63
The spring you speak of is the trigger spring. It comes out of the frame behind the trigger and into the trigger bar where it's slotted on the bottom.
If it's not there I need a dental pick, about 10 minutes, and the proper four letter incantation.
If it's not there I need a dental pick, about 10 minutes, and the proper four letter incantation.
- January 26th, 2011, 1:34 pm
- Forum: Other 9x18's
- Topic: Is there a trick to removing the sear on a PA 63?
- Replies: 9
- Views: 6921
Re: Is there a trick to removing the sear on a PA 63?
IIRC it goes out the right side.
Move it to the right side so that the small side of the sear goes thru the big hole left by the hammer pin.
You rotate it in two axes and out that side.
Move it to the right side so that the small side of the sear goes thru the big hole left by the hammer pin.
You rotate it in two axes and out that side.
- January 11th, 2011, 10:10 pm
- Forum: Other firearms...
- Topic: Newest Find
- Replies: 19
- Views: 15005
Re: Newest Find
Wait, I know.